8
A - button mode selection source (two-stroke engine / czterotakt)
Button active only TIG welding. Mode selection is signaled by lighting up
symbol
2T
dwutaktu mode or the corresponding diode
4T
czterotaktu mode. In dwutaktu mode, pressing the switch in the handle grip will turn the
symbol
2T
dwutaktu mode or the corresponding diode
4T
czterotaktu mode. In dwutaktu mode, pressing the switch in the handle grip will turn the
symbol
2T
dwutaktu mode or the corresponding diode
4T
czterotaktu mode. In dwutaktu mode, pressing the switch in the handle grip will turn the
symbol
2T
dwutaktu mode or the corresponding diode
4T
czterotaktu mode. In dwutaktu mode, pressing the switch in the handle grip will turn the
symbol
2T
dwutaktu mode or the corresponding diode
4T
czterotaktu mode. In dwutaktu mode, pressing the switch in the handle grip will turn the
ionizer and arc ignition. Welding is carried out with a finger on the switch. Releasing the switch will stop the welding. In czterotaktu mode, pressing the
switch in the handle grip will turn the ionizer arc starts and then release the switch and lead to the slow welding switch. Pressing the switch will stop the
welding.
B - On / off switch pulse
Button active only TIG welding. Mode selection is signaled by lighting up the symbol
- welding with pulse,
- welding without pulse.
C - selection button welding methods
The button is used to select the welding method. The choice of method is signaled by lighting up the symbol:
MMA
- welding with covered electrode (MMA)
LIFT
- welding the tungsten electrode in inert gas
MMA
- welding with covered electrode (MMA)
LIFT
- welding the tungsten electrode in inert gas
MMA
- welding with covered electrode (MMA)
LIFT
- welding the tungsten electrode in inert gas
MMA
- welding with covered electrode (MMA)
LIFT
- welding the tungsten electrode in inert gas
protection from arc ignition by friction (Lift TIG) H.
F -
tungsten welding electrode gas-shielded arc pilot (HF TIG).
protection from arc ignition by friction (Lift TIG) H.
F -
tungsten welding electrode gas-shielded arc pilot (HF TIG).
protection from arc ignition by friction (Lift TIG) H.
F -
tungsten welding electrode gas-shielded arc pilot (HF TIG).
protection from arc ignition by friction (Lift TIG) H.
F -
tungsten welding electrode gas-shielded arc pilot (HF TIG).
protection from arc ignition by friction (Lift TIG) H.
F -
tungsten welding electrode gas-shielded arc pilot (HF TIG).
D - The adjustment knob
Knob is used to change the welding parameters.
Briefly pressing the knob causes the transition between the adjustable parameters. Currently adjustable parameter is indicated by illumination of the
corresponding LEDs and the display parameters (I) shows the actual parameter value. Rotate the knob to the left to decrease, and turning to the right
to increase the parameter value. Pressing the knob will store the parameter value and move to the next parameter.
