Sherman digitec DIGITIG 200AC / DC MULTIPRO Скачать руководство пользователя страница 17

 

17 

17. GUARANTEE 

Guarantee granted for a period of 12 months for business entities or consumers for 24 months from the date of sale. 

The guarantee will be respected by the advertiser after the presentation of proof of purchase (invoice or receipt) and warranty card inscribed 
with the product name, serial number, date of sale and point of sale bearing the stamp.

In the case of warranty repair should contact TECWELD, which will arrange the reception device by courier. 

Shipments sent at the expense of TECWELD through other shipping companies will not be accepted! 

Welder should be provided with the welding torch. Complaints device without the torch will not be considered.

The device transmitted to the complaint must be packed in the original carton, and protected by Styrofoam original fittings. TECWELD 
company is not liable for damage caused by a welder during transport.

If you wish to discard this product, do not throw it with general household waste. According to the WEEE Directive 
(Directive 2002/96 / EC) in force in the European Union for used electrical and electronic equipment must be used 
methods of utilization.

In Poland, in accordance with the provisions of the Act of July 1, 2005. Waste electrical and electronic 
equipment is prohibited to place together with other wastes of used equipment marked with crossed out 
wheeled bin symbol.

The user who wishes to discard this product, it is obliged to return waste electrical and electronic equipment to a used equipment collection point. 
Collection points are conducted, among others, by wholesalers and retailers of equipment and the municipal organizational units engaged in waste 
collection.

These legal obligations have been introduced to reduce the amount of waste generated from waste electrical and electronic equipment and to 
ensure an adequate level of collection, recovery and recycling of used equipment. Proper implementation of these duties is important especially 
when the waste equipment contains hazardous components which have a particularly negative impact on the environment and human health.

TECWELD Peter Polak 
41-943 Piekary Slaskie Street. Emerald 21/3/6

branch: 
41-909 Bytom ul. 3 Cross Tel. +48 32 38-69-428, fax +48 
32 38-69-434 e-mail: [email protected] 

www.tecweld.pl 

Содержание DIGITIG 200AC / DC MULTIPRO



















Отзывы: