1. Press the MODE Button until the screen displays
INSTALL MODE
2. Press ENTER. The unit will prompt you for a
password.
3. Using the UP/DOWN keys enter the PASSWORD
The default is 1;2;3;4.
4. Press ENTER for each digit.
5. Press the MODE key to find SET PASSWORD
6. Press ENTER.
7. Scroll UP / DOWN to a set the digit
8. Press ENTER to save the setting
9.
To EXIT out of the SET PASSWORD mode
press the MODE button. Then press the Down
button till EXIT MODE displays. Then press ENTER.
Changing the password
Sherlotronics SA (Pty) Ltd, Aintree Street, Northriding, Johannesburg South Africa.
Tel: +27(11) 462-5101 Fax: +27(11) 462-8177 www.sherlotronics.co.za
View the Event Log
1. Press the MODE Button once. The screen displays
VIEW EVENTS
2. Press ENTER. The unit will display the time / date it received an activation.
3. Press the DOWN key to view the UNIT/ USER and the RELAY that was triggered.
4. Continue with step 3 pressing the DOWN key to view each event one at a time.
5. To EXIT out of the VIEW EVENTS mode
press the MODE button till the display show the current time & date screen.
Note:
The unit will auto Exit out of this mode if no key is pressed after 30 seconds.
^
^
MODE
ENTER
DELETE
UP
DOWN
COMPLEX-RX : V3
Remote Access Control System
ESC
5
6,8
set
password
7
pg 8
^
^
MODE
ENTER
DELETE
UP
DOWN
COMPLEX-RX : V3
Remote Access Control System
ESC
install
mode
3
1
2,4
Defaulting the password
1. Press the Delete and UP Button together while
powering up the unit
2. The LCD will Flash PASSWORD RESET
3. The default password will be 1;2;3;4
Defaulting the Event Log
1. Press the Delete and MODE Button together while powering up the unit
2. The LCD will Flash EVENT RESET
3. The unit will have no Events stored on its internal eEprom memory
