Saving to the microSD card
Sherlotronics SA (Pty) Ltd, Aintree Street, Northriding, Johannesburg South Africa.
Tel: +27(11) 462-5101 Fax: +27(11) 462-8177 www.sherlotronics.co.za
microSD
Adapter
ScanDisk
GB
micro
SD
2
SD CARD
A microSD card must first be formatted
to a FAT32 File system.
Carefully plug the card into the
card holder. The display will
ready SD Card inserted.
To make a backup to the microSD card
follow the steps below:
Press the MODE button twice or till the
display says SAVE TO SD CARD.
Press ENTER. The display will say,
Busy Writing. This takes approx 40s
to complete.
You may now remove the card. The
display will say, SD Card Ejected.
Once you have inserted microSD card into a pc, with
either a SD Card adaptor or USB multi adaptor open
the file. There should be (3) two folders called:
EVENTS.txt ; BACKUP.txt and
2000.txt
Please do not alter
the file names or information within the files in any way
or this will corrupt the backup.
We recommend that you look at saving these three files
in a folder or safe place for future use.
Note:
The unit will auto Exit out of this mode if no key is pressed after 30 seconds.
pg 9
^
^
MODE
ENTER
DELETE
UP
DOWN
COMPLEX-RX : V3
Remote Access Control System
ESC
ScanDisk
GB
micro
SD
2
Recommend
ScanDisk
Tested with:
128mB
2GB
4GB
