1. Press the MODE Button until the screen displays
INSTALL MODE
2. Press ENTER. The unit will prompt you for a
password.
3. Using the UP/DOWN keys enter the PASSWORD
The default is 1;2;3;4.
4. Press ENTER for each digit.
5. Press the UP/DOWN key to find RELAY TIME
6. Press ENTER.
7. Scroll UP / DOWN to a set the required digit
8. Press ENTER to save the setting.
9. To EXIT out of the RELAY TIME mode
press the MODE button. Then press the Down
button till EXIT MODE displays. Then press ENTER.
Setting the Relay time
Sherlotronics SA (Pty) Ltd, Aintree Street, Northriding, Johannesburg South Africa.
Tel: +27(11) 462-5101 Fax: +27(11) 462-8177 www.sherlotronics.co.za
Note:
Both relays are globally programmed to switch between 1 - 10 Seconds.
Some gate motors require a longer or shorter trigger input, so the relay
settings may be programmed accordingly to motor you are connecting this
unit. The Complex Rx_V3 is factory set to 1.0 Second.
^
^
MODE
ENTER
DELETE
UP
DOWN
COMPLEX-RX : V3
Remote Access Control System
ESC
5
6,8
relay
TIME
7
pg 7
^
^
MODE
ENTER
DELETE
UP
DOWN
COMPLEX-RX : V3
Remote Access Control System
ESC
install
mode
3
1
2,4
