^
^
MODE
ENTER
DELETE
UP
DOWN
COMPLEX-RX : V3
Remote Access Control System
ESC
^
^
MODE
ENTER
DELETE
UP
DOWN
COMPLEX-RX : V3
Remote Access Control System
ESC
^
^
MODE
ENTER
DELETE
UP
DOWN
COMPLEX-RX : V3
Remote Access Control System
ESC
install
mode
Learning in Remotes
1. Press the MODE Button until the screen displays
INSTALL MODE
2. Press ENTER. The unit will prompt you for a
password.
3. Using the UP/DOWN keys enter the PASSWORD
The default is 1;2;3;4.
4. Press ENTER for each digit.
learn /
delete
5. Press the MODE key to find LEARN / DELETE
6. Press ENTER. The display will read :
UNIT 1A / RELAY 1
7. Scroll UP / DOWN to a UNIT no you wish to
program. To switch between RELAY 1 & 2 press
the UP & DOWN keys quickly together.
UNIT 1a
relay1
8. Press the ENTER button if you wish to program
the remote TX into the unit. The unit will display,
Press now.
9. Activate the remote TX. The unit will display,
Press again. Once the remote TX is learnt in a
*
star
will display on the bottom right hand of the screen.
.
10.To EXIT out of the LEARN/DETETE mode press the
MODE button. Then press the Down button till
EXIT MODE displays. Then press ENTER.
7
UNIT 1a
relay1
*
9
Remote TX
Press
together
to switch
between
RELAY
1&2
3
1
2,4
6,8
5
10
10
10
Sherlotronics SA (Pty) Ltd, Aintree Street, Northriding, Johannesburg South Africa.
Tel: +27(11) 462-5101 Fax: +27(11) 462-8177 www.sherlotronics.co.za
pg 4
