Sherlotronics SA (Pty) Ltd, Aintree Street, Northriding, Johannesburg South Africa.
Tel: +27(11) 462-5101 Fax: +27(11) 462-8177 www.sherlotronics.co.za
pg 11
1. Press the MODE Button until the screen displays
INSTALL MODE
2. Press ENTER. The unit will prompt you for a
password.
3. Using the UP/DOWN keys enter the PASSWORD
The default is 1;2;3;4.
4. Press ENTER for each digit.
5. Press the MODE key to find :- SET BARING
6. Press ENTER. The display will read :
7. Scroll UP / DOWN to a UNIT no you wish to
Bar. To switch between RELAY 1 & 2 press
the UP & DOWN keys together.
UNIT 1A / RELAY 1
8. Press and HOLD the ENTER key if you wish to
Bar the remote TX from working on the unit.
The unit will say BARING, after 3 seconds a
+
sign
will display on the bottom right side of the screen.
9. To EXIT out of the BARING mode press the
MODE button.
10. Then press the Down button till EXIT MODE displays.
Then press ENTER.
Set Baring
^
^
MODE
ENTER
DELETE
UP
DOWN
COMPLEX-RX : V3
Remote Access Control System
ESC
UNIT 1a
relay1
10
10
8
^
^
MODE
ENTER
DELETE
UP
DOWN
COMPLEX-RX : V3
Remote Access Control System
ESC
SET
BARING
7
Press
together
to switch
between
RELAY
1&2
6,8
5
+
indicates
the remote
is Bared
^
^
MODE
ENTER
DELETE
UP
DOWN
COMPLEX-RX : V3
Remote Access Control System
ESC
install
mode
3
1
2,4
Please note:
If you release the Enter key for a short time the remote TX
will not be bared.
+
