Sherbourn SR-120, Руководство пользователя

Страница: 16 / 37

16
OFF ON
CABLE TUNER DVD
AUX1 SAT VCR
INPUT AUX2
STEREO MODE
SCAN/
PRESET
MUTE BAND
UP POWER DOWN
BAND CH
INPUT VOL
STATUS VIDEO DIM
MENU RETURN EXIT
ZONE 2
ENTER
VOLUME
SR-120+
9
12
10
11
13
14
9
. SCAN/PRESET
This button controls how the UP and DOWN buttons work (item 10). It
toggles between SCAN mode (where UP and DOWN instruct the SR-120
to search in the chosen direction for the next station it can find) and the
PRESET mode (where the UP and DOWN buttons move to the previous or
next preset station). The VFD and OSD will tell you which mode you’re in.
10
. DOWN/UP
These buttons tell the SR-120 to go to the last/next station in the tuner
presets or to look for the next station it can find in the chosen direction -
depending on the SCAN/PRESET selection (item 9).
11
. ZONE 2 controls
This section of the remote allows you to control the Zone-2 section of the
SR-120. The Zone 2 output always appears at the line level ZONE outputs. If
the rear panel ZONE 2 switch is enabled, the Zone 2 output is also available
at the BACK SURROUND OR ZONE 2 speaker outputs (the amplifiers
must also be enabled).

POWER
This button switches the power to Zone 2 On and Off. If Zone 2 is on
and you turn off the SR-120, the Standby LED will remain blue to
show you Zone 2 is active. If the amplifiers are enabled, the amplifier
channel status LEDs will also remain blue.

INPUT
This button allows you to choose the input for your Zone 2 operation.
These inputs would have been setup in the Zone 2 section of the
SETUP menu. With the Zone 2 feature active, you can listen to what
is playing in the main theater. The SR-120 will down mix the audio
to two-channel. You can also listen to another analog source (ex. CD
player) while a Blu-Ray (DVD) is playing in the main theater as long
as the source is analog (Tuner, Aux 2 to Aux 11).

CH (-) (+)
This button changes your stations if Zone 2 is set to Tuner

BAND
This button allows you to toggle between AM and FM in Zone 2

VOL (-) (+)
These buttons turn the Volume up and down in Zone 2.
12
. VIDEO
This button will display the current video resolution and allow you to change
it. Each time you press this, the unit will change resolution.
13
. STATUS
This button will display the current status and mode of the SR-120.
14
. EXIT
This button will exit out of the menus