Shenzhen Kinan Technology KC2108i, Руководство пользователя

Страница: 84 / 98

KC2108i /KC2116i/KC2132i User Manual
- 84 -
List logging enabled
The common way to log events is to use the internal log list of the IP-KVM . To show
the log list, click on “Event Log” on the “Maintenance” page.
Since the IP-KVM's system memory is used to save all the information, the maximum
number of possible log list entries is restricted to 1.000 events. Every entry that
exceeds this limit overrides the oldest one, automatically.
Warning
If the reset button on the HTML frontend is used to restart the IP-KVM, all logging
information is saved permanently and is available after the IP-KVM has been started.
If the IP-KVM loses power or a hard reset is performed, all logging data will be lost.
To avoid this, use one of the following log methods.
NFS Logging enabled
Define a NFS server, where a directory or a static link has to be exported, to write all
logging data to a file that is located there. To write logging data from more than one
IP-KVM devices to only one NFS share, you have to define a file name that is unique
for each device. When you change the NFS settings and press the button “Apply” ,
the NFS share will be mounted immediately. That means, the NFS share and the
NFS server must be filled with valid sources or you will get an error message.
SMTP Logging enabled
With this option, the IP-KVM is able to send Emails to an address given by the Email
address text field in the Event Log Settings. These mails contain the same
description strings as the internal log file and the mail subject is filled with the event
group of the occurred log event. In order to use this log destination you have to
specify a SMTP server, that has to be reachable from the IP-KVM device and that
needs no authentication at all (<serverip> :< port>).
SNMP Logging enabled
If this is activated, the IP-KVM sends a SNMP trap to a specified destination IP
address, every time a log event occurs. If the receiver requires a community string,
you can set it in the appropriate text field. Most of the event traps only contain one
descriptive string with all information about the log event. Only authentication and
host power events have an own trap class that consists of several fields with detailed
information about the occurred event. To receive this SNMP traps, any SNMP trap
listener may be used.