Shenzhen Kinan Technology KC2108i, Руководство пользователя

Страница: 37 / 98

KC2108i /KC2116i/KC2132i User Manual
- 37 -
The KVM-over-IP firmware features a Telnet server that enables a user to connect
via a standard Telnet client. In case the Telnet program is using a VT 100, VT 102 or
VT 220 terminal or an according emulation, it is even possible to perform a console
redirection as long as the KVM-over-IP host machine is using a text mode screen
resolution.
Log in the Telnet console by the telnet command as required by the Telnet client,
for instance in a UNIX shell:
Telnet 192.168.0.70
Then the system will prompt for inputting a user name and password to log in the
device. You need to input right credentials so that the Telnet management is fully
conform to function controls in Web.
Once you have successfully logged into the KVM-over-IP a command line will be
presented and you can enter according management commands.
Telnet port supports two operating modes: command mode and terminal
mode.Command mode is used for control or display some parameters.The terminal
port mode is activated through access to serial port 1(if the serial port has set
corresponding configuration), all the inputs will be redirected to serial port 1.
The following lists the command syntax and its application according to command
mode:
Help:
Display the list of possible commands
Cls: Clear the screen
Quit:
Exits the current dialog box and disconnect from the user port.
Version: Shows the version information
Terminal: Activates the DMO of serial port 1.Press ESC exits the switch and return
to command mode.