12
·
Connect the test leads across with the object being
measured.
·
Read the value from display.
Warning
a) To avoid harms to you or damages to the Meter from
eletric shock, do not attempt to measure voltages higher
than DC 1000V or AC 750Vrms, although readings may be
obtained.
b) When the Meter working at an effective voltage over
60V in DC or 30V rms in AC, special care should be taken
for there is danger of electric shock.
c) When the measurement has been completed,
disconnect the connection between the testing leads and
the circuit under test and remove testing leads from the
input terminals.
Figure 3
