Secure your equipment
S12 switch will trigger an emergency closure of the shelter. It can be connected to Sentinel weather
station for exemple so the weather condition trigger dome closure independantly to any PC
connection.
Installing the dome reference position sensor
Azimuth absolute position is reset by a reference position usually very close to your dome parking
positions.
Fig: induction sensor
The induction sensor which is used will sense a metal piece moving in front of it. It does hav three
wires : blue (ground), black (« sense ») and brown (12V). They should be connected to RJ11 cable
(Shelyak Instruments reference SE0040).
Inductive sensor
J11 (RJ11)
ground (blue)
4 (green)
sense (black)
5 (yellow)
12V (brown)
6 (blue)
When using a single passive switch, wire 4 & 5 of J11 should be connected to this switch.
Guide Utilisateur / User Manual - Dome Tracker– DC0007C 38 / 60
