background image

.                                                                                          .

.

.

5

24

WARNINGS:

As with any product that performs automatic functions, there are certain

safety precautions that you must practice and be aware of.

1. Keep ALL transmitters out of the reach of children.

2. The use and operations of this system is the sole responsibility of the

operator.

IMPORTANT NOTICE

OPERATION

A. REMOTE TRANSMITTER OPERATION:

Transmitter

Button

System Function or Feature

Remark

Lock Doors & Arm System

 - 

Arm and Delete The 2 Stage Shock Sensor. Press twice within 3 seconds

 -   - 

Arm and Noiseless Mode 

Press within 3 seconds

 - 

Arm System and Hidden Alarm Function

Press within 3 seconds

 + 

Silent Arming / Disarming

Ignition in "off" position.

 +   (2-sec.) Active Anti Car-Jacking Mode 

Ignition in "on" position press

and hold for 2 seconds

Unlock Doors & Disarm System

 - 

Two Steps Door Unlock & Disarm System

Press twice within 3 seconds.

 (2-sec.)

Trunk Release (Channel 3)

Press and Hold for 2 seconds

   - 

Passive Arming By-pass

While the system Disarmed.

   -   - 

Remote Control Entry/Exit Valet Mode

While the system Disarmed, 
Press within 3 seconds

 

   + 

Channel # 4 Timer Output
Car Locator

 (3-sec.)

Panic function

Press and Hold for 3 seconds.

4

. Press the 

F

 

button

 once again then the 

“Minutes”

 digit flashes

for adjusting.

  

5

. Press the   or   

button

 to decrease or increase the 

“Minute”

 digit

until 

2:30.

  

6.

Press the 

F

 

button once

 again then   icon flashes for the alert

alarm 

“ON / OFF”

 setting

   7

. Press the  

button

 to start the count down timer, and the 

“ON”

 icon

will display on the LCD screen. Press the   

button

 to stop the count

down timer, and the 

“OFF”

 icon will display on the LCD screen.

8

. Press the 

F

 

button

 for 

2 seconds

 with one-melody sound to

confirm exiting the timer program mode.

Note: Maximum is 19 hours.

LCD REMOTE CONTROL TRANSCEIVER

Содержание CS-500S















Отзывы: