. .
.
.
21
8
OPERATION
HIDDEN ALARM FUNCTION:
Press the
button
first then within 3
seconds, press the
button
to activate the
Hidden Alarm Function
.
The security system will arm and be in
Hidden Alarm Function
. The
siren or horn will be silenced even if the sensor is triggered in the armed
status.
H. PASSIVE ARMING
(See Alarm Feature II-2 Programming.)
Active Arming / Disarming
will allow you to operate your security system
with the
remote transmitter only
. This security system is equipped with
an
optional Passive Arming feature
, which allows the security system
to automatically arm 30 seconds after the last door is closed.
To enter Passive Arming:
1.
Turn the ignition to the
OFF
position and exit the vehicle.
2.
After all entrances are closed, the security system LED will flash fast for
30 seconds. If you re-open the doors, hood or trunk, the security system
LED will stop flashing. It will begin flashing again once the vehicles
entrances are closed.
3.
After the 30-second timer has elapsed, the security system will
automatically
ARM
. The siren will
[1] chirp
and the parking lights
will
flash [1] time
and remain
ON
for 10 seconds.
PASSIVE DOOR LOCKING
:
The vehicle doors will
automatically lock
after passive arming cycle has
been completed.
PASSIVE ARMING BY-PASS:
While the system is disarmed, press the
button
twice,
the system will respond with
[1] chirp
and the LED will
turn
ON.
The security system will remain in this temporary state until
exited. To exit
Passive By-pass
, press the transmitters or
buttons
and the system will return to normal status.
8. Low Battery Indication:
When the power of the battery weakens, it has
[2] short beep sounds
and the
icon
will flash while pressing the button of the LCD screen
transceiver.
9. Set Up Fixed Count Down (Parking) Timer:
1. Press the
F
button first
, within
3 seconds
press and hold the
button for
2 seconds
, the LCD screen will show the icon and timer
(ie.0:10).
2. Press the
button
again showing next order time on the screen
(ie.0:20), press them again (ie.0:30) and so on.
3. The buttons will start counting down then the
icon
will flash.
Note:
1. The count down period is fixed as 10 minutes, 20 minutes,
30 minutes, 1 hour, 1.5 hours and 2 hours maximum.
2. When the count down timer is showing 0:00 that means to
turn off the timer.
3. Press
F
button
for real time indication when the timer is
counting down.
10. Out Of Range Indication:
If this feature is selected, the security system will automatically
check the
range every 20 minutes
after the system is armed.
1. If the user is within range, the
icon
will display on the LCD screen.
2. If user is out of range, it has five short beeps sounds and the
icon
will disappear on the LCD screen.
LCD REMOTE CONTROL TRANSCEIVER
Содержание CS-500S
Страница 1: ... ...
