. .
.
.
9
20
I. ACTIVE DISARMING UNLOCK AND DISARM:
1.
Press the
button
on the transmitter.
2.
The siren will
chirp [2] times
and the parking lights
will flash [2]
times
and then remain
ON for 30 seconds
to indicating that the
security system is now
Disarmed
.
3.
The vehicles doors will unlock and the dome light will turn on for 30
seconds upon disarming.
System
Doors
Trunk/Hood Shock Sensor
Disarm
Trigger
Trigger
Trigger
OPERATION
Ignition Trigger CLEAR THE FLASH ICON:
Pressing the
F
button
3
times within 3 seconds
will clear the flash icon on
the LCD screen transceiver.
TAMPER DISARMING
: If the alarm is triggered, upon
disarm of the system, the siren will
chirp 4 times
and
the parking lights will
flash 3 times
.
PATHWAY ILLUMINATION
: This
feature turns the parking light
ON
for 30 seconds
upon an unlock signal and for 10 seconds for a lock
signal.
Two Step Door Unlock:
This feature will independently
unlock the
drivers door only
when disarming the security system. Pressing the
button
a second time
within 3 seconds
will
unlock the other doors.
Automatic Rearm
: If this feature is selected, the security system will
automatically re-arm itself in 60 seconds after disarming with the remote
transmitter.
Automatic Rearm will cancel if any door is opened
before the 60 second timer has elapsed.
1. Screen Lamp ON:
Press and hold the
F
button for [1] second
, the
melody will sound and the LCD screen light will turn
ON
for 5 seconds.
2. Power Save Mode:
While in power save mode, the LCD
remote transmitter uses 0 current to save the battery
power.
Entry:
Press and hold the
F
button for 5 seconds, with one
melody sound and
SAVE
icon on the screen to indicate entry
of the
power save mode
.
Exit:
Press any button on the LCD remote transmitter to exit
the
power save mode
.
3. Clear the Flash Icon and Melody Sound:
Pressing the
F
button
3 times
within 3 seconds will clear the flashing icon and the melody
sound on the LCD screen transceiver.
4. Stop The Trigger Melody Sound:
While triggering the alarm the LCD
screen will alert the user through a melody sound and flashing trigger
icon, press any button on the LCD remote transmitter to stop the melody
sound
only.
5. Button Lock:
It is useful if you want to disable the trans-
mission function of the remote transmitter temporarily to
prevent any accidental pressing of buttons. Press the
F
button
then within 3 seconds press and hold the ( )
button
for 2
seconds to activate or cancel the button lock function, the
icon will display on the LCD screen to show the LCD remote
transmitter is on
button lock
.
6. Vibration / Melody Mode:
It is useful when you are in a
noisy place and difficult to hear the beep sounds from the
remote control. The remote will vibrate when the security
system is violated. Press the
F
button first
, then
within 3 seconds press and hold the ( )
button
for
2
seconds
to select the mode of vibration or melody. The
icon
will be displayed on the LCD screen to show the remote transceiver
is on vibration mode.
7. Enable/Disable Bi Sound while Pressing Button:
It has a short bi sound while pressing the button of the LCD remote
transmitter. If you want to mute the sound, press the
F
button
first then
within 3 seconds press and hold the
(Bi)
button for 2 seconds to
disable the sound.
LCD REMOTE CONTROL TRANSCEIVER
Содержание CS-500S
Страница 1: ... ...
