Shel lab SCO10A, Руководство по установке и эксплуатации

Страница: 11 / 60

11 | P a g e
RECEIVING YOUR UNIT
I
NSPECT THE
S
HIPMENT
•
When a unit leaves the factory, safe delivery becomes the responsibility of the carrier.
•
Damage sustained during transit is not covered by the manufacturing defect warranty.
•
Save the shipping carton until you are certain that the unit and its accessories function properly.
When you receive your unit, inspect it for concealed loss or damage to its interior and exterior. If you
find any damage to the unit, follow the carrier’s procedure for claiming damage or loss .
1. Carefully inspect the shipping carton for damage.
2. Report any damage to the carrier service that delivered the unit.
3. If the carton is not damaged, open the carton and remove the contents.
4. Inspect the unit for signs of damage. Use the orientation images in this chapter as
references.
5. The unit should come with an Installation and Operation Manual.
6. Verify that the correct number of accessory items has been included.
7. Carefully check all packaging for accessory items before discarding.
Included Accessories
Model Copper Pan Token Humidification Pan Access Port Stopper* Leveling Feet
SCO5A 1 1 1 4
SCO10A 2 2 2 4
Model Chamber HEPA Filter Chamber Filter Cap CO
2
Tubing Kit Ceiling Air Duct
SCO5A 1 1 1 1
SCO10A 2 2 2 2
Model Shelves Shelf Slides Shelf Standards
Power Cord
SCO5A 3 6 4 1
SCO10A 6 12 8 2
*The access port stopper ships installed in each unit chamber access port.