Trouble shooting of the AcuDew - AcuTrak system should only be carried
out on a disconnected AcuDew - AcuTrak and under safe conditions.
Do not modify the unit. Repairs to the AcuTrak must be done by Shaw
Moisture Meters or authorized distributors only.
Warning
Before mounting the AcuDew Transmitter into any system ensure
the system is safe to work on. Depressurize and verify that all power
connections are isolated in the off position.
Installation should be carried out by trained technicians and following
local safety protocols.
1.2 Definitions
Hazardous voltages have been defined as the ranges: 75 to 1500 volt DC and 50 to
1000 volt AC.
Technicians are qualified persons educated or trained to mount, operate,
troubleshoot and validate operation, in accordance with safety regulations.
Operators are persons, being familiar with the content of this manual, able to
adjust and operate the AcuTrak during normal operation.
1.3 Receipt and Unpacking
Unpack the AcuDew/AcuTrak without damaging it and make sure that the
manual always follows the AcuDew/AcuTrak, and is always available. The
packaging materials should always follow the AcuDew/AcuTrak until this has been
permanently mounted.
Check the receipt of the AcuDew/AcuTrak to ensure the type corresponds to the
one ordered.
1.4 Environment
Avoid direct sunlight, dust, high temperatures, mechanical vibrations and shock,
as well as rain and heavy moisture. If avoidance of high moisture is not possible,
employ ventilation, rather than increased temperature, to prevent condensation.
•
•
7
!
•
•
!
