3.1.2 Connecting the AcuLoop
To connect the AcuLoop display to the
AcuDew:
Disconnect the connector from
the AcuDew by turning the locking ring
counter-clockwise.
Screw this connector on to the back connection of the
AcuLoop display.
Align the keyed notch and keyed groove.
Gently push the AcuLoop display on to the AcuDew
turning the locking ring clockwise to secure.
3.1.3 Connecting the AcuDew to an AcuTrak
The AcuTrak displays a digital readout of the 4-20 mA input
signal derived from an attached AcuDew.
The AcuTrak indicator has:
A five digit, red LED display, relay
ON/OFF indication.
Process control with two
adjustable alarm set points.
An analogue output.
RS485 serial communications.
Alarm set points can be adjusted via
the keys on the front panel.
24 V = RED WIRE
MAINS POWER SUPPLY
(WHITE, BLACK AND GREEN)
•
•
•
•
mA+ = BLUE WIRE
1.
2.
3.
4.
10
