Sharper Image SI670, Инструкция по эксплуатации

Страница: 11 / 30

Note: The following steps are for coaxial connections in the TV
mode.
Turn on the receiver/monitor and the VCR (if connected) off.
1. To activate mode selection options, press the
MODE SELECT
button.
2. Select TV mode (if not already selected).
3. To select Auto Program mode, press the
LEFT/RIGHT or
button on the upper area of the remote control.
4. To set the source option to CATV (cable) or AIR (antenna),
press the UP/DOWN buttons on the upper area of the remote
control.
5. To begin the Auto Program function, press the CHANNEL
button. It will take several minutes for the monitor to scan and
memorize all available channels.
Channel Programming
11