58
Appendix
Specifications
Product type
Model
Video system
Display method
DMD panel
Lens
Projection lamp
Video input signal
S-video input signal
Component input signal
Horizontal resolution
RGB input signal
Pixel clock
Vertical frequency
Horizontal frequency
Computer control signal
Rated voltage
Input current
Rated frequency
Power consumption
Power dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
Projector
XV-Z9000E
PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
DTV 480i/480P/720P/1080i
Single Panel Digital Micromirror Device (DMD™) by Texas Instruments, RGB optical
shutter method
Panel size: 0.8
Drive method: Digital Light Processing (DLP™) by Texas Instruments
No. of dots: 921,600 dots (1,280 [H]
720 [V])
1–1.35
zoom lens, F3.0, f=32.5–44.0 mm
250 W NSH lamp
RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75
Ω
terminated
4-pin Mini DIN connector (INPUT 3)
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω
terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω
terminated
RCA Connector (INPUT 1, 2)
Y: 1.0 Vp-p, sync negative, 75
Ω
terminated
C
B
: 0.7 Vp-p, 75
Ω
terminated
C
R
: 0.7 Vp-p, 75
Ω
terminated
520 TV lines (NTSC 3.58 input), 750 TV lines (DTV 720P input)
15-
PIN
MINI
D-
SUB
CONNECTOR
(INPUT 5):
RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,
75
Ω
terminated
H
ORIZONTAL
SYNC
.
SIGNAL
: TTL level (positive/negative) or composite sync (Apple only)
V
ERTICAL
SYNC
.
SIGNAL
: Same as above
12–120 MHz
43–100 Hz
15–81 kHz
9-pin D-sub connector (RS-232C Port)
AC 100–240 V
3.6 A
50/60 Hz
345 W (SELECTING “BRIGHT” in the “Theatre Mode”)
310 W (SELECTING “NORMAL” in the “Theatre Mode”)
1,400 BTU/hour
5
°
C to
35
°
C
20
°
C to
60
°
C
Plastic
38 kHz
475
178
406 mm (W
H
D) (main body only)
475
178
496 mm (W
H
D) (including terminal cover)
9.5 kg (main body only)
Remote control, Two AA size batteries, Power cord (1.8 m), 21-pin RCA conversion
adaptor, Video cable, Computer RGB cable, Terminal cover, Lens cap (attached), CD-
ROM, Two projector operation manuals, SharpVision Manager operation manual
Lamp unit (Lamp/cage module) (BQC-XVZ9000/1), Remote control (RRMCG1657CESA),
AA size batteries, Power cord (QACCV4002CEZZ, QACCB5024CENA), 21-pin RCA
conversion adaptor (QSOCZ0361CEZZ), Video cable (QCNWGA001WJZZ), Computer
RGB cable (QCNW-5050CEZZ), Terminal cover (GCOVA1985CEKA), Lens cap
(PCAPH1056CESA), CD-ROM (UDSKA0047CEN1), Two projector operation manuals
(TINS-7521CEZZ, TINS-7522CEZZ), SharpVision Manager operation manual (TINS-
7523CEZZ)
This SHARP projector uses a DMD chip. This very sophisticated chip
contains 921,600 pixels. As with any high technology electronic
equipment such as large screen TVs, video systems and video
cameras, there are certain acceptable tolerances that the equipment
must conform to.
This unit has some inactive pixels within acceptable tolerances which
may result in inactive dots on the picture screen. This will not affect
the picture quality or the life expectancy of the unit.
Specifications are subject to change without notice.
