Sharp XL-DV100NH, Руководство по эксплуатации

Страница: 46 / 48

XL-DV100NH_001 EN.fm
E-35
2009December 14
8
7
6
5
4
3
2
1
Troubleshooting chart (continued)
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter on
the remote control.
Condensation can cause the unit to malfunction. If this
happens, leave the power on with no disc in the unit until
normal playback is possible (about 1 hour). Wipe off any
condensation on the transmitter with a soft cloth before
operating the unit.
When this product is subjected to strong external
interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1
Set the unit to the stand-by mode and turn the power on
again.
2
If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
Remove the CD from the unit. Make sure there is no CD in
the disc tray. Then, set the unit to the power stand-by
mode. Carrying the unit with discs left inside can damage
the unit.
Caution:
This operation will erase all data stored in memory
including clock, timer settings, tuner preset, and CD
programme.
■
MP3/WMA/JPEG files
Symptom Possible cause
●
Playback
does not start.
●
Is the disc loaded upside down?
●
Are the files supported by the unit?
●
Some files
cannot
playback.
●
Are the files supported by the unit?
●
Is it a false MP3 file?
●
Is the JPEG file size more than
10Mbytes?
●
Read-in time
takes very
long.
●
Is the disc contain too many
folders or files?
●
Is the file size too big?
●
Is the disc distorted or scratched?
■
Remote control
Symptom Possible cause
●
The remote control
does not operate.
●
Is the AC power lead of the
unit plugged in?
●
Is the battery polarity
correct?
●
Are the batteries dead?
●
Is the distance or angle
incorrect?
●
Does the remote control
sensor receive strong light?
■
USB
Symptom Possible cause
●
Device
cannot be
detected.
●
Is there any MP3/WMA file
available?
●
Is the device properly connected?
●
Is it an MTP device?
●
Does the device contain AAC file
only?
●
Playback
does not
start.
●
Is it a copyright protected WMA file?
●
Is it a false MP3 file?
●
Wrong time
display.
●
Wrong file
name
display.
●
Is Variable Bitrate file being played
back?
●
Is the File Name written in Chinese
or Japanese characters?
■
iPod
Symptom Possible cause
●
No sound is
produced.
No image appears
on the TV/monitor.
●
The iPod is not playing.
●
The iPod is not properly
connected to the unit.
●
Is the AC power lead of the
unit plugged in?
●
The video cable is not
properly connected. (Only
support by “Video TV”
connection. Not support by
“S-VIDEO”, “COMPONENT
VIDEO” or “SCART”
connection.)
●
The TV/monitor’s input
selection is not properly set.
●
iPod will not
charge.
●
Wrong iPod adaptor is used.
●
The iPod is not making full
contact with the iPod
connector.
●
Using iPod (3
rd
generation).
■
Tuner
Symptom Possible cause
●
The radio makes
unusual noises
continuously.
●
Is the unit placed near the
TV or computer?
●
Is the FM aerial or AM loop
aerial placed properly?
Move the aerial away from
the AC power lead if it is
located nearby.
■
Condensation
■
If problem occurs
■
Before transporting the unit
■
Clearing all the memory (reset)
1 Press the ON/STAND-BY button to enter the power
stand-by mode.
2 Whilst pressing down the OPEN/CLOSE button, press
the ON/STAND-BY button until “RESET” appears.