Sharp XL-DV100NH, Руководство по эксплуатации

Страница: 41 / 48

XL-DV100NH_001 EN.fm
E-30
2009December 14
8
7
6
5
4
3
2
1
Listening to the radio
Notes:
●
When radio interference occurs, auto scan tuning may
stop automatically at that point.
●
Auto scan tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING ( or )
button again.
●
When an RDS (Radio Data System) station is tuned in,
the frequency will be displayed first, and then the RDS
indicator will light up. Finally, the station name will
appear.
●
Full auto tuning can be achieved for RDS stations
“ASPM”, see page 31.
●
Tuning will stop when reach to 87.50 MHz or 108.00
MHz.
To receive an FM stereo transmission:
Press the TUNER/BAND button to select FM mono, FM
stereo or AM.
●
“ ” will appear when an FM broadcast is in stereo.
●
If the FM reception is weak, press the TUNER/BAND
button to extinguish the “ST” indicator. The reception
changes to monaural, and the sound becomes clearer.
You can store 40 AM and FM stations in memory and recall
them at the push of a button. (Preset tuning)
Note:
The backup function protects the memorised stations for a
few hours should there be a power failure or the AC power
lead become disconnected.
Press the PRESET ( or ) button for less than 0.5
seconds to select the desired station.
■
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button on main unit repeatedly or
press the TUNER/BAND button on remote control to
select the TUNER mode.
3
Press the TUNING ( or ) button to tune in to the
desired station.
Manual tuning:
Press the TUNING ( or ) button as many times as
required to tune in to the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more
than 0.5 seconds, scanning will start automatically and
the tuner will stop at the first receivable broadcast
station.
DIRECT DIRECT
ON / ON /
S TAND-BY S TAND-BY
OPEN / CLO S E OPEN / CLO S E
TUNING TUNING
PRE S ET PRE S ET
(X-BA SS ) (X-BA SS )
EQUALIZER EQUALIZER
VOLUME VOLUME
MEMORY MEMORY
TOP MENU TOP MENU
S UB TITLE S UB TITLE
/ DIGE S T / DIGE S T
/ DI S PLAY / DI S PLAY
MENU/PBC MENU/PBC
RETURN RETURN
CLOCK / TIMER CLOCK / TIMER
S LEEP S LEEP
O S D/(TV OUT) O S D/(TV OUT) AUDIO AUDIO
TUNING TUNING
PRE S ET PRE S ET
S ETUP S ETUP
ENTER ENTER
1 2 3
4 5 6
7 8 9
0 10 10
ZOOM ZOOM RANDOM RANDOM
DVD/U S B DVD/U S B
AUX AUX TUNER/BAND TUNER/BAND
ANGLE ANGLE
S LOW S TEP
A-B
RD S RD S
A S PM / PT A S PM / PTY DI S DI S P
ON / ON /
S TAND-BY S TAND-BY
TUNING TUNING
MEMORY MEMORY
TUNING TUNING
PRE S ET PRE S ET PRE S ET PRE S ET
PRE S ET PRE S ET
PRE S ET PRE S ET
TUNER/BAND TUNER/BAND
FM stereo mode indicator
FM stereo receiving indicator
■
Memorising a station
1
Perform steps 1 - 3 in “Tuning”.
2
Press the MEMORY button.
3
Within 5 seconds, press the PRESET or PRESET
button to select the preset channel number. Store the
stations in memory, in order, starting with preset
channel 1.
4
Press the MEMORY button to store that station in
memory. If the “MEMORY” and preset number
indicators disappear before the station is memorised,
repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
■
To recall a memorised station