Sharp Viewcamz VL-Z800S-S Скачать руководство пользователя

Страница: 78 / 128

Advanced Features
Playback

Advanced Features

Audio Dubbing
Feature

Available mode:

Tape Playback

You can add narration to recordings made
with this camcorder, while preserving the
original audio and video recordings.

Microphone for Audio Dubbing

You can use the built-in stereo microphone
to record narration.

Notes:

• Audio dubbing does not function through the

DV terminal.

• You cannot use audio dubbing with

recordings made in LP mode.

• You cannot use the built-in stereo microphone

for audio dubbing when the audio/video/S-
video cable is connected.

• You cannot use the zoom microphone to

record narration.

Audio Recording

In normal recording mode

12-bit audio recording

The audio is recorded in stereo on Audio 1.

Audio 1:

Stereo (left and right) sound

Audio 2:

No audio

16-bit audio recording

The audio is recorded in stereo with the left
and right sound on two separate channels.

Audio 1:

Left sound

Audio 2:

Right sound

In Audio Dubbing mode

12-bit audio recording

The dubbed audio is recorded on Audio 2.

Audio 1:

Original stereo (left and right)

sound

Audio 2:

Dubbed stereo (left and right)

sound

16-bit audio recording

The dubbed audio is recorded on Audio 2
over the original right sound. Both dubbed
and original sounds are mono.

Audio 1:

Original left sound

Audio 2:

Dubbed sound

Notes:

• You can select the 12-bit or 16-bit audio

recording mode by performing the procedure
on page 47.

• You can perform audio dubbing, such as

music, on Audio 2 if you connect another
source via the AV cable. If the audio to be
dubbed was recorded in 12-bit audio
recording mode, it can be recorded on Audio
2 in stereo sound.

Built-in stereo

microphone

VL-Z800S-GB-067-076

04.1.23, 8:07 AM

Содержание Viewcamz VL-Z800S-S

































































































































Результаты поиска

Содержание Viewcamz VL-Z800S-S

Отзывы:

Похожие инструкции для Viewcamz VL-Z800S-S

Бренды по названию

Популярные бренды

Sharp Viewcamz VL-Z800S-S, Руководство по эксплуатации

Результаты поиска

Содержание Viewcamz VL-Z800S-S

Отзывы:

Похожие инструкции для Viewcamz VL-Z800S-S

Бренды по названию

Популярные бренды