Notice: Please do not take out the memory card while
in recording, photo taking or USB mode, otherwise
the card or the files in it could be damaged.
average sized moving object in a moderate distance is
detected.
Least sensitivity:
Starting to record when a close
and small moving object is detected.
e.Make sure the device is fixed and stable when using
this function, or it will be affected and fail to detect the
motion of the object properly when the car rocks.
f.When the Motion detection and the Timelapse
recording are both functioning, press the Video button
can only start Motion detect recording.
4.Loop recording
a.Loop recording functions in the Regular recording
mode.The recorder can keep recording without
changing the memory card.
b.When the memory card is full, it will delete the earliest
video files automatically and keep recording.
c.Rules for automatically files deletion
The protected files will not be deleted. (This should
be set manually in Playback/Photo/Protection)
The earliest files will be deleted first.It deletes one
file each time.
For example:FILE0001.MP4
、
FILE0002.MP4…FILE0059.MP4.When the memory card
is full,the system will delete FILE0001 first and create
FILE0060.MP4 and then keep recording.If the room is
still not enough for recording,it will delete FILE002.MP4
until the spared recording time is long enough for one
section.Then FILE0061.MP4 will be created and
thus,loop recording.
Secondary sensitivity:
Starting to record when an
Safety Caution
Notice:
1.The electronomagnetic
field of specific frequency
may
affect the audio and video of this product.
2.If the static or electromagnet lead to the failure of the data
transfer,please break the connectionor restart the application
program and reconnect the communication cable(USB etc.).
3.Please do not put this product in an air-tight place like
bookcase or closet in case of the electric shock or fire caused
by excess heat.
4.Please do not put the product near fire.
5.
lease keep the mainboard module at least 5cm from
other electronic equipments on your plane to avoid
inter-interference.
Precautions for using this recorder
1.Please check the recording first before starting to record .
2.Please be noted that this product is not dustproof or
waterproof.
3.Please do not touch the lense with dirty hands.
4.Please keep the product from water.If there is water getting
inside, the product might be damaged and cannot be repaired
in some situations.
5.Please do not hold the product face toward the sun or other
strong light,which may cause failure.
Product sketch map
2011/10/01
10:08
20.5GB
1080p
Auto
shooting
2011/10/01
10:08
20.5GB
1080p
2011/10/01
10:08
20.5GB
1080p
2011/10/01
10:08
20.5GB
1080p
00:00
00:00:00
00.0GB
1080p/ps
720p /pH
2011/10/01
10:08
20.5GB
1080p
00 10
:
01
:
2
、
Display icons
展开尺寸：420X285mm
折叠尺寸：142.5X84mm
User mannual
Package contents
AV cable
1.Function introduction
Menu button
1.In standby mode, press and hold down this button for 3
seconds to enter the menu setting state.
2.In menu setting status, short press this button can
browse the taps while long press it for 3 seconds can go
back to the parent menu, and continue the long press to
exit.
3.In playback mode, short press this button will stop
playback video. Wihle browsing the files, short press this
button can enter the Action menu and long press canl exit
playback mode.
Playback button
1.In standby mode, short press will enter playback
status.
2.While playing back, press this button to play or stop the
video.
3.In menu setting status, press this button to confirm.
Camera button
1.In standby mode, press this button to take pictures or
increase the digital zoom.
2.In menu setting mode, press this button to up select.
Video button
1.In standby mode, press this button to record video or
reduce the digital zoom.
2.In menu setting mode, press this button to down select.
HDMI interface
1.The interface is C-TYPE. Connecting the recorder to a
HD display device with a special cable, the video data
can be transferred to the device and the operations on
the pictures and videos can be done on the device.
2.Support 1920x1080,1440x108,1280x720 output.
Multi-functional USB interface
1.The interface is compatible with standard MINI USB 5P
cable, using to connect PC.
2.Output AV and input auto power supply.
Charging indicator
1. Recharging the indicator turns red, after full the Green
indicator on.
2.If no external power imput , the charging indicator will
not shine.
Status indicator
1.In standby mode,the blue indicator on.
2.While recording,the blue indicator flashes rapidly.
3.While taking photoes, the blue indicator flashes slowly.
continuous shooting
time
photo pixel
memory card
spare capacity
video resolution
image quality
motion detection
date
timelapse recording
start shooting
upward/downward
acceleration
left /right
acceleration
recording time
battery display
a.
b. When taking out the memory card, jog the card until it
clicks,then the card will pop out.
Insert the card with the side with golden contacts
down,then jog the card until it clicks.
Operation guide
1.Power supply
2.Insert and take out memory card
3.Turn on/off
a.
automatically boot and go into standby mode.
b.when the power is turned off, the machine will
automatically shut off.
4.Installing the device
a.Install the holder into the slot on the back of the
device.
b.Invert the device and fix the holder on the windshield
or other spots with a capacious view and can be direct
mounted.
c.Both the angle of the holder and the lense are
adjustable.
When the power is turned on, the machine will
Video recording
1.Normal recording mode
icon on the screen shows it is recording and the
redord time shows on the bottom of the screen.
b.The record files will be saved in sections as the time
pre-set in video sections in the video menu,for
example,if the setting is 15 minutes a section, then
the system will create a new record file and keep
recording when the recording time reaches 15
minutes.The files will be named after the number of
the order they are created.
c.The video section setting cannot be closed or
removed.Two sequential files are connected
seamlessly without losing a single frame, which can
keep the video smooth and intact.
2.Timelapse recording
a. When the timelapse recording is started, the icon will
be shown on the standby screen.
a.Press the Video button to start recording.The red
recording.The red icon shows it is recording.The
screen does not show record time in this mode.Press
the Video button again to stop recording.
: 1 frame per second
: 10 frames per second
: 30 frames per second
: 60 frames per second
c. This function is designed for recording slow-moving
scene, such as flowers blooming, plants
growing,etc.The record files in this condition take up
less storage space.If the record files are to be played
back, make sure a specialized play software is
available for playback frame by frame or slow
playback.
d. Before using this function, make sure the Motion
detection in system menu is closed.
3.Motion detection
a.When the motion detection is started, the icon will be
shown on the standby screen.Press Video button to
record, and the icon will keep flashing,ready for
trigger event.
b.When a trigger event is detected,it will start
recording. The red Video icon will be shown on the
screen.
c.Record time will not be shown in this mode.If the
moving object stays still for 30 minutes, it will stop
recording and go back to detecting mode,waiting for
next trigger. Press the Video button again can stop
the motion detection recording and go back to the
standby mode.
d.According to the moving object’s ratio in the visual
field,there are three levels of trigger sensitivity to
select.
High sensitivity:
It will be triggered to record the
moment a distant and small moving object is detected.
b. Press the Video button to start timelapse
13
LCD screen
Lense
5V DC
Please read this manual carefully before using the product.
HD Driving Video Recorder
User manual
FOXTECH
HoryzonHD
Main body
128g双铜折页
horyzonhd V3 has auto-on function, no power button
is necessary.
Menu
Playback
Camera
Record
USB interface
HDMI interface
Microphone
Memory card slot
Power Cord
01
02
03
04
05
06
07
11
10
09
08
13
12
Photo trigger
Video trigger
Gnd
Video out
14
Photo and Video remote triggering will be made
possible by using foxtech new 3 way cam switch.