Advanced Features
Camera Recording
Advanced
Features
61
Manual Exposure
Available modes:
TAPE-CAMERA, DUAL-
CAMERA, CARD-CAMERA
The camcorder is preset to Auto Exposure
mode, which automatically chooses the optimal
aperture. When there is too much contrast in
brightness between the subject and back-
ground, however, you may not be able to
record a clear image. In this case, use the
manual exposure function to adjust the
exposure level (F-number) and correct the
aperture.
Example of use
• Background is too bright and subject too dark
(backlit subject).
—Select a smaller F-number (to allow more
light through the lens).
• Subject is too bright against background.
—Select a larger F-number (to allow less light
through the lens).
1
Set the camcorder to TAPE-CAMERA,
DUAL-CAMERA, or CARD-CAMERA
mode.
2
In Recording Standby mode, set the
Manual Selection switch to MANUAL to
display the MANUAL screen.
WH I T E B A L . AU T O
E XPO SURE
BR I GHT E R
SHU T . SP E ED
SC E NE ME NU
AU T O
AU T O
AU T O
OF F
MANUA L
6 0 min
F 3 . 4
E X P O SURE
6 0 min
RE -
TURN
5
Touch [
K
] or [
L
] to select the desired F-
number.
• The number shown is the selected F-
number.
• The adjustment range is 15 steps from
F1.6 (most light) to F19 (least light).
To cancel Manual Exposure mode
Touch [AUTO] in step 4 above.
Notes:
• In order to check the manual setting state after
performing step 6, reset the Manual Selection
switch to MANUAL.
•
The camcorder will return to Auto Exposure
mode if a scene setting is selected and then
cancelled afterward.
•
Manual Exposure cannot be used with Night
Recording.
• See page 68 to cancel all the manual settings
selected on the MANUAL screen.
6
Set the Manual Selection switch to
MANUAL LOCK to lock the selected F-
number.
• The camera recording screen is
displayed.
AU T O
UAL
MAN -
E X P O S U R E
6 0 min
RE -
TURN
4
Touch [MANUAL] to display the
EXPOSURE adjustment screen.
Note:
You can also adjust the F-number by
rotating the Manual Focus ring while the
EXPOSURE adjustment screen is displayed.
3
Touch [EXPOSURE] to display the
EXPOSURE selection screen.
Note:
To cancel setting Manual Exposure,
touch [RETURN] on the EXPOSURE selection
screen.
EXPOSURE
selection
screen
EXPOSURE
adjustment
screen