Sharp UX-P100, Руководство по обслуживанию

Страница: 10 / 92

1 – 8
UX-P100U
UX-P200U
1
3
Plug the power cord
into a 120 V grounded
outlet.
Connect the telephone
line cord to the TEL.
LINE jack and a wall
telephone jack. Attach the Paper Tray
and Document Support.
Load the Imaging Film.
1.Open the Operation Panel (press ). 3. Insert the Green Gears.
IMPORTANT: Do NOT discard the
Green Gears. They are not included
with replacement Imaging Film.
Note: To enter your name and fax number and set the date and time so that they
appear at the top of each fax you send, see pages 16 - 19 of the Operation
Manual.
5
2. Remove the Imaging Film from its packaging.
Cut the band that holds the rolls together.
2 Connect the Handset
and place it on the
Handset Rest.
Note: If the
support does
not go in,
turn it over.
4. Insert the film into the print compartment.
5. Rotate the front spool as shown
until the film is taut.
6. Close the Operation Panel (press
down on both sides to make sure it
clicks into place).
6
Loading paper.
Note: If you loaded legal paper, see page 15 of the Operation Manual to change the paper size
setting to LEGAL.
7
Select the reception mode for incoming faxes and
voice calls:
FAX mode: The machine automatically answers all
calls and begins fax reception.
TEL mode: Lift the handset when the machine rings.
Press to begin fax reception.
START/MEMORY
TEL
.
LIN
E
Fit ends of
rolls onto hubs
FAX TEL
JAN-01 10:30
FAX TEL
JAN-01 10:30
The arrow points
to the selected
reception mode.
RESOLUTION/
RECEPTION MODE
1 slot
2 slots
Make sure
the gears fit
into the slots
in the ends of
the rolls.
Insert the
paper print
side down.
1
4
The stack
should not
be higher
than this line
• GENTLY LOAD PAPER INTO THE PAPER TRAY.
• DO NOT FORCE IT DOWN INTO THE FEED SLOT.
2
1
[5] Quick setup guide