Sharp SJ-FS810V-WH, Руководство по обслуживанию, Страница: 40 / 48

SJFS810VWH
40
2-5-2. Replacement of Def. heater
1) Remove the center screw of Heater support to
take it off from the food liner.
Heater support
2) Raise the protrusion part of Heater support. Then
remove Heater cover.
Heater cover
Protrusion parts
Protrusion part of Drain support al(2 pcs.)
Heater cover
Def. heater ass'y
Heater support
3) Open Def.heater fixed part of Heater support to
the right and left, then remove Def.heater.
Fixed parts
Def.heater
Heater support
2-5. DEFROST HEATER ASSEMBLY
2-5-1. Taking-out Evaporator
1) Take-out C Partition ffb ass’y.
2) Take-out Fan louver.
3) Take-out E.V cover ass’y.
Evaporator
Food liner convex part
4) As shown in the above figure, pull the upper part
of Evaporator toward you, pull it diagonally so that
the pipe of Evaporator does not contact the convex
part of food liner.
Food liner convex part
Evaporator
Pipe
5) Pull the Evaporator for remove as shown in the
above figure.
Evaporator
NOTE: When pulling Evaporator and bending the
pipes,pay attention so as not to break and deform
the pipes. Still, take care not to hurt yourself by fin of
Evaporator.