Sharp SF-2540, Руководство по эксплуатации

Страница: 9 / 104

7
MAKING COPIES
Normal copying
NORMAL COPYING
Use the document glass for copying single originals and bound
documents. If an optional reversing automatic document feeder
(RADF) is installed, multipage documents can be copied auto-
matically. See page 49.
● Image loss (max. 4 mm (5/32")) can occur at the leading and
trailing edges of the copies.
One-sided copying
1 Open the document cover and place an original face
down on the document glass, using the centring scale
to position it.
NOTE:
Do not place objects under the original size detector, because
they may damage it.
2 Close the document cover.
●
The original size will be detected and indicated in the message
display.
3 Ensure that the desired paper tray is selected.
● Paper matching the size of the original will be automatically
selected when the auto paper select function is enabled. To
copy onto paper of a different size, press the TRAY SELECT
key. (216 mm x 330 mm (8-1/2" x 13") size paper is regarded
as B4 (8-1/2" x 14") size.)
●
The auto paper select function can be disabled using a key
operator program. If this function is disabled, use the TRAY
SELECT key to select the desired paper tray.
★
KEY OPERATOR See page 93 to enable or disable the auto paper
selection.
4 Adjust the copy density.
●
This copier has three selectable exposure modes –
AUTOMATIC, MANUAL and PHOTO.
● Automatic exposure is the standard initial setting for this
copier. In this mode, the characteristics of the original are
“read” by the exposure system and adjustments are
automatically made. This optimizes the contrast of the copied
images by reducing the effect of coloured or shaded
background areas.
★
KEY OPERATOR See page 87 to adjust the automatic exposure
level.
LIGHT DARK TRAY SELECT EXPOSURE
AUTO
MANUAL
PHOTO
1 0 0 %
COPY RATIO
EXPOSURE
ORIGINAL
AUTO
AUTO PAPER
SELECT
A4
A4
1.
A3 2.
LIGHT DARK EXPOSURE
AUTO
MANUAL
PHOTO
EXPOSURE
AUTO
A4 1.
A3 2.
Original size detector