Auto Power Off
This sets the Player so that power is automatically
shut off if playback is stopped and you do not perform
any operations for about 180, 60 or 10 minutes.
On (180 min), On (60 min), On (10 min), Off
Front Display/LED
If you feel that the front panel display and indicators
on the player are too bright when watching movies,
you can dim them or turn them off except for the
POWER indicator.
Control: Dimmer1 Dimmer2, Dimmer3, Off
Dimmer1: Brightness control during 100% to 10%
Dimmer2: Brightness control during 100% to 10%
Dimmer3: Brightness control during 100% to 10%
Item
LINK : On, Off
POWERLINK:
Yes: POWER On/Off link together
No: POWER On/Off not link together
NOTE
•
This function is available using HDMI 1 OUT terminal
only.
•
For details, refer to the operation manual of TV.
Control Panel
This lets you set display of the control panel on the
TV screen to on or off.
On, Off
Item
AQUOS LINK
This lets you set the Player to receive the control
signal from the AQUOS LINK remote control via the
HDMI cable.
Item
Item
System Reset
You can reset all settings to the factory presets.
Reset, Not Reset
OK
Item
DivX(R) Registration
The DivX registration code is displayed.
NOTE
•
To learn more, visit www.divx.com/vod.
Yes, No
Item
DivX(R) Deregistration
You can deactivate your DivX information on the
player.
NOTE
•
To learn more, visit www.divx.com/vod.
Item
On: Checks for firmware updates automatically and
notifies you about new firmware.
Off: Does not check for new firmware version automatically.
Auto Update Setting
This lets you to set whether the player should
automatically check for new firmware versions on the
network and notifies you about new firmware.
Item
RC-1 (default), RC-2, RC-3
Item
Remote Control Code
This player can respond to one of three sets of
remote control codes. If you have other SHARP
products in the vicinity of this player, the other
products may respond to this player remote control.
To prevent this, you can select a different remote code.
NOTE
•
If you have selected a new remote code, you must set the
remote control handset to use the same code (see page
).
English, Español, Français
Item
Go to “HOME” > “Settings” > “System Settings”
On Screen Language
You can set the language you want to display on the
screen.
Quick Start
You can reduce the player's start-up time after turning
on the power.
On: The player quickly starts up from standby.
Off: Power consumption is small during standby.
Item
System Setting
52
Set
tings
