Sharp PN-Y425 Скачать руководство пользователя страница 19

Страница: 19 / 49

Basic Operation

3
4

1. INPUT (Input mode selection)

The menu is displayed. Press

to select the input

mode, and press

ENTER

to enter.

* You can select the input terminal by pressing the input

switch of the monitor.

Input mode

Video

Audio

DVI-D

DVI-D input
terminal

Audio1 input terminal

HDMI[AV]

HDMI input
terminal

HDMI input terminal /
Audio1 input terminal

HDMI[PC]
D-SUB[RGB]

D-sub input
terminal

Audio1 input terminal

D-SUB[COMPONENT]

Audio2 input terminals

D-SUB[VIDEO]
USB

USB port

When a USB flash drive is connected, the input mode
automatically changes to “USB”. The input mode also
automatically changes to “USB” if the power is turned on with
a USB flash drive connected.

2. MUTE

Turns off the volume temporarily.

Press the MUTE button again to turn the sound back to the

previous level.

3. MENU

Displays and turns off the menu screen. (see page 25.)

4. VOL +/- (Volume adjustment)

Pressing

displays the VOLUME menu when the

menu screen is not displayed.

Press

to adjust the volume of the sound.

* If you do not press any buttons for about 5 seconds, the

VOLUME menu automatically disappears.

* To change the volume of video or music when the input

mode is “USB”, use “Settings during play”. (See page 24.)

5. /- (Brightness adjustment)

Pressing

displays the BRIGHT menu when the

menu screen is not displayed.

Press

to adjust the brightness.

* If you do not press any buttons for about 30 seconds, the

BRIGHT menu automatically disappears.

6. ENTER

Confirms the setting.

7. RETURN

Returns to the previous screen.

8. SIZE (Screen size selection)/Yellow

Each time you press this button, the screen size changes in

the following order: (See page 20.)

NORMAL → WIDE → Dot by Dot →NORMAL...

9. DISPLAY/Red

Displays monitor information (Input mode, LAN Setup, etc.).

The display disappears automatically after about 15 seconds.

10. MODE (Color mode selection)/Green

Each time you press this button, the color mode changes in

the following order:

STD (Standard) → VIVID → sRGB→

HIGH ILLUMINANCE → USB → STD...

• HIGH ILLUMINANCE is a display with colors suited to

bright locations.

• sRGB is for DVI-D, HDMI[PC], and D-SUB[RGB] input only.

sRGB is international standard of color representation

specified by IEC (International Electrotechnical

Commission). Color conversion is made in taking account

of liquid crystal’s characteristics and represents color tone

close to its original image.

Caution

• When the input mode is [USB], operations 3, 4, 5, 8, 9, and

10 cannot be performed. Change an input mode to other

than USB before performing these operations. COLOR

MODE, VOLUME and SIZE can be changed while a file in

a USB flash drive is being played. (See page 24.)

TIPS

• 8

SIZE

, 9

DISPLAY

, and 10

MODE

are also used when playing a

file in a USB flash drive and when entering text. Colors and

operation names appear in the screen.

Содержание PN-Y425


















































Результаты поиска

Содержание PN-Y425

Отзывы:

Похожие инструкции для PN-Y425

Бренды по названию

Популярные бренды

Sharp PN-Y425, Руководство по эксплуатации

Результаты поиска

Содержание PN-Y425

Отзывы:

Похожие инструкции для PN-Y425

Бренды по названию

Популярные бренды