Sharp PN-K321 Скачать руководство пользователя страница 41

Страница: 41 / 171

PN-K321/K322B SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4

- 9

5 – 4. SYSTEM LOG AND TEMPERATURE LOG

TO USB FLASHDRIVE

■

USB FLASH DRIVE

Use the USB Flash Drive corresponding to the following standard.

- Format : FAT32/FAT16

- USB : 2.0/1.1

(CAUTION)

・

It does not correspond to SD card reader.

・

It does not correspond to USB HUB

・

Don

’

t use the USB Flash Drive enciphered

■

SAVE LOG

1 ) Press [ENTER] button in "Save Log" of SERVICE MENU3.

The following screen is displayed

2 ) Connect USB Flash Drive to the monitor

(As for USB, the screw stop of the lid is carried out)

3) If a cursor is united with [Yes] and press [ENTER] button,

Preservation will begin.

4 ) If preservation is successful, it will return to SERVICE MENU.

The file of [XXlog_(model name)_(serial number)_(time).dat] is

created by the root directory of a USB Flash Drive.

Display the saved file with an InfoDisp Report tool.

5 ) The following OSD is displayed when writing goes wrong.

Reput USB Flash Drive, or there is OFF-ON of power supply,

and carry out again.

6 )Even if it carries out repetition implementation, when you fail,

exchange USB Flash Drive

5 – 5. USER SETTING VALUE PRESERVATION

TO USB FLASH DRIVE

■

USB FLASH DRIVE

Use the USB Flash Drive corresponding to the following

standard.

- Format : FAT32/FAT16

- USB : 2.0/1.1

(CAUTION)

・

It does not correspond to SD card reader.

・

It does not correspond to USB HUB

・

Don

’

t use the USB Flash Drive enciphered

■

USER SETTING VALUE BACKUP

1) Press [ENTER] button in "SAVE/RESTORE SETTINGS

VALUE" of SERVICE MENU3. The following screen is

displayed

2 ) If a cursor is united with [SAVE] and press [ENTER] button,

Select the item to save and press [ENTER] button.

ALL

Almost all preset values are saved except a setup

changed by the state of a main part.

Information which is not saved

- IP address of LAN

- The preset value etc. which change with input

signals, such as a clock and a phase

PICTURE

ONLY

Only setup of image adjustment is saved.

3 ) Connect USB Flash Drive to the monitor

4) If a cursor is united with [Yes] and press [ENTER] button,

preservation will begin.

5 ) If preservation is successful, it will return to SERVICE MENU.

The file of [XXprop_(model name)_(serial number)_(time).bak]

is created by the root directory of a USB Flash Drive.

6 ) The following OSD is displayed when writing goes wrong.

Содержание PN-K321












































































































































































Результаты поиска

Содержание PN-K321

Отзывы:

Бренды по названию

Популярные бренды

Sharp PN-K321, Руководство по обслуживанию

Результаты поиска

Содержание PN-K321

Отзывы:

Бренды по названию

Популярные бренды