Sharp PN-80TH5 страница 71 Скачать руководство пользователя | Manualshive

Страница: 71 / 73

background image

71

E

•  When installing, removing or moving the monitor, ensure that this is carried out by at least 4 people.
•  Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
•  This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.

• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the

thickness of the mounting bracket.

Screws (M6)
Mounting bracket
Monitor mounting

5/16 - 3/8 inch (8-10 mm)

•  Do not use an impact driver.
•  After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
•  Do not use any screw holes other than VESA holes for installation.
•  When moving this monitor, be sure to hold it with the handles, the unit sides, the unit bottom or the unit top. Do not grasp the

screen, unit corner, tray, speaker, or speaker cover. This may cause product damage, failure, or injury.

• If you need to temporarily place the monitor on a table or other surface during installation, spread a thick soft cloth on the

table to prevent damage to the screen and table.

• Prior to repacking or removal, remove the tray and speaker covers.
• This monitor should not be mounted flat or used as a touch table type installation. Please consult an authorized SHARP

dealer before considering any type of flat installation (when the monitor is tilted more than 20 degrees upward from the
perpendicular in relation to a level surface), and find out about the mandatory flat mounting instructions.

n

Attaching the Tray

Push until the tabs lock

into place (4 places)

Tray mount fitting

Tabs (4 places)

Caution

• When attaching the tray, do not pinch the USB cable on the back

of the tray.

The USB cable on the back of the tray can be fastened with the cable clamp to the rear of the monitor.

*1

*1

*1

*1

*1

*2 *2

*1

*2

Mounting Precautions

(For SHARP dealers and service engineers)

«
...
69
70
71
72
73
»

Содержание PN-80TH5










































































Отзывы:

Нет отзывов

Похожие инструкции для PN-80TH5

PlasmaSync 42XM3

Бренд: NEC Страницы: 8

PlasmaSync 42XR4

Бренд: NEC Страницы: 2

PlasmaSync 42XM4

Бренд: NEC Страницы: 2

PlasmaSync 50XM5

Бренд: NEC Страницы: 10

PlasmaSync 42VR5

Бренд: NEC Страницы: 7

PlasmaSync 42VM5

Бренд: NEC Страницы: 4

PlasmaSync 42VM5

Бренд: NEC Страницы: 10

PlasmaSync 42VM5

Бренд: NEC Страницы: 2

FPT5084 - 50" Plasma TV

Бренд: Samsung Страницы: 83

460Pn - SyncMaster - 46" LCD Monitor

Бренд: Samsung Страницы: 151

Бренд: ColorDMD Страницы: 4

Бренд: I-Inc Страницы: 20

Бренд: Collins Страницы: 23

Бренд: Vector Страницы: 42

Бренд: Dynascan Страницы: 28

Бренд: switel Страницы: 1

11-81336-225 - MicroTouch M150 High...

Бренд: 3M Страницы: 35

Бренд: Vitek Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды