Sharp PN-80TH5 страница 56 Скачать руководство пользователя

Страница: 56 / 73

6. Click on “LAN SETUP” under NETWORK.

7. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc.

DHCP CLIENT

If your LAN has a DHCP server and you wish to obtain an

address automatically, change this setting to ON.

To set the address manually, set this to OFF.

IP ADDRESS

If the DHCP CLIENT is set to OFF, specify an IP address.

SUBNET MASK

If the DHCP CLIENT is set to OFF, specify the subnet mask.

DEFAULT GATEWAY

If the DHCP CLIENT is set to OFF, specify the default gateway.

If you are not using a default gateway, specify “0.0.0.0”.

8. When the setting is changed, click [Apply].

9. Check the message and click [OK].

10. Exit the web browser.

11. Restore the computer’s IP address jotted in Step 6, “(2)

Specifying the computer’s IP address”.

12. Connect the monitor and the computer to the LAN.

Caution

• Wait 10 seconds after clicking [OK] before proceeding.

• When operating using the remote control unit or similar,

click [Refresh].

Controlling with a computer

Basic operation

You use the web browser on a computer on the LAN to

control the monitor.

1. Launch the web browser on the computer.

2. In the “Address” box, type “http://” followed by your monitor’s

IP address followed by “/”, then press the Enter key.

You can confirm the IP address with the INFORMATION

function.

When prompted to enter a USER NAME and PASSWORD,

type the user name and password that you specified in the

SECURITY settings (see page 58), and click [OK].

The following values are set in the initial settings.

USER NAME: admin, PASSWORD: admin

* To enable security on the monitor, change the user

name and password. (See page 58.)

3. You can check, control, and change the monitor’s status

and settings by clicking the menu items on the left side of

the screen.

• If you see an [Apply] button next to a setting, click it after

you change that setting.

TIPS

• See pages 57 to 61 for details on each setting.

• If you click [Refresh] before the screen finishes updating

the current display, the “Server Busy Error” will appear.

Wait for a moment before operating your monitor again.

• You cannot operate the monitor while it is warming up.

• If “DHCP CLIENT” is set to “ON”, press the INFORMATION

button on the remote control unit two times and then check

the monitor’s IP address.

Controlling the Monitor with a computer (LAN)

Содержание PN-80TH5










































































Результаты поиска

Содержание PN-80TH5

Отзывы:

Похожие инструкции для PN-80TH5

Бренды по названию

Популярные бренды

Sharp PN-80TH5, Руководство по эксплуатации

Результаты поиска

Содержание PN-80TH5

Отзывы:

Похожие инструкции для PN-80TH5

Бренды по названию

Популярные бренды