Sharp Plasmacluster KC-6400E, Руководство по эксплуатации

Страница: 19 / 100

ENGLISH
DEUTSCH
E-17
FILTER CLEANING
Care Cycle 2 months
Clean the top surface of the Washable Active
Carbon Filter lightly with a vacuum cleaner.
WASHABLE ACTIVE CARBON FILTER CARE
1
2
3
4
5
6
Reinstall the filters as shown on
Page E-10,11.
CAUTION
CAUTION
• Some carbon may adhere to the
towel, but it is harmless.
• It is not allowed to wring out the
filter.
The filter will be saturated
with water after rinsing. To
decrease drying time, wrap
the filter in an old thick towel
so that excess water can be
removed.
Remove excess water.
If rinsing in a container, be sure to rinse 3 to 4 times
so that the odour is rinsed thoroughly from the filter.
Rinse thoroughly
with clean water.
Handle with care to prevent damage
to the activated carbon particles.
CAUTION
If the filter surface is very
dirty, scrub with an old
toothbrush.
Allow the filter to soak approximately
10 minutes before washing.
Dilute as indicated on
the detergent container.
Fill a large container with warm
water, add a mild kitchen
detergent and stir.
HAND WASH ONLY!
DO NOT TUMBLE DRY!
Dry the filter outdoors if pos-
sible in a well ventilated
area.
CAUTION
• The wet filter is heavy. Fix it securely for
drying to make sure it does not fall down.
• The filter takes longer to dry in winter,
on rainy days. Wash it on a day when
the weather is good and dry it in the sun.
Move it indoors at night to prevent freez-
ing.
• Dry the filter outdoors in a well ventilated
area. If dried indoors, the water dripping
off the filter may soil your floor.
• Make sure that the activated carbon has
not shifted to one side inside the filter. If
it has, distribute it evenly with your fin-
gers.
• Let the filter dry thoroughly.
If used while the filter is still moist, then
the air that is exhausted from the main
unit will have an odour. It may take 1 or
2 days to dry.
Reinstalling the Filters.
Washable Active Carbon Filter
(The illustration has used “KC-6500E” )
Care Cycle
2 months
Towel