Sharp Plasmacluster KC-6400E, Руководство по эксплуатации

Страница: 17 / 100

ENGLISH
DEUTSCH
E-15
Running Clean Air Mode Only
(when you wish to turn OFF
Humidifying)
2
1
AUTO operation
The fan speed is automatically
switched (HIGH*, MEDIUM, LOW)
depending on the amount of
impurities in the air. The sensors
detect the impurities for efficient
air purification.
MAX operation
The unit will operate at a fan speed
of MAX.
MEDIUM operation
The unit will operate at a fan speed
of MEDIUM.
LOW operation
The unit will operate quietly using
minimal air intake.
* HIGH fan speed is an interme-
diate speed between MEDIUM
and MAX.
Plasmacluster Ion Mode
LIGHTS ON/OFF
CAUTION
(Please press the Plasmacluster ON/OFF Button for 3 seconds
2 short beeps are generated.)
Switches the Plasmacluster Indicator Light and CLEAN-SIGN
Light either ON or OFF.
On rainy days, etc. when your room is reasonably humid, turn
Humidify Mode OFF.
When the device is running, press the Humidify Mode
Selection Button to turn Humidify Mode OFF.
Press the Clean Air Mode Selection Button to set your
preferred purification mode.
Each time the Button is pressed during operation, the
Plasmacluster Ion Mode turns ON and OFF and the
Plasmacluster ON/OFF Indicator Light turns ON (green) and OFF.
Use when the Plasmacluster Indicator Light and the CLEAN-
SIGN Light are too bright.
When the Plasmacluster ON/OFF Button is released before the 2 short beeps,
The Plasmacluster Ion Mode switches between ON and OFF; the CLEAN-
SIGN Light does not turn ON/OFF because only the Plasmacluster Indicator
Light turns ON/OFF.