MX-FN23 DISASSEMBLY AND ASSEMBLY 8 – 4
F. Paper rear edge detector
1) Disconnect the connector, remove the screw, and remove the
upper stay right unit.
2) Remove the screw, and remove the ST paper entry paper
guide lower.
3) Remove the paper rear edge detector, and disconnect the con-
nector.
G. Paper transport motor
1)
Disconnect the connector, remove the screw, and remove the
harness holder.
2)
Disconnect the connector, remove the screw, and remove the
paper transport motor.
H. Rear edge take-up roller
1)
Remove the E-ring, the pulley, the belt, and the parallel pin.
2)
Disconnect the connector, remove the screw, and remove the
take-up solenoid mounting plate unit.
