Sharp MX-2616N Скачать руководство пользователя страница 106

Страница: 106 / 832

1-65

BEFORE USING THE MACHINE

Contents

Place the box on a flat surface.

Place a sheet of newspaper on the surface before placing the
box.

• Do not point the holes down as used toner will spill out.

• Do not discard the removed waste toner box. Store it in a plastic bag. The person in charge shall collect it for

maintenance.

Install the new waste toner box.

Insert the box from above at a slant. (The direction opposite to
when you removed it.)

Push the waste toner box into the
machine.

Push the box in until it clicks into place.

Lock the waste toner box.

Move the lock of the waste toner box to the lock position.

Close the front cover.

Caution

•

Do not throw the waste toner box into a fire. Toner may fly and cause burns.

•

Store the waste toner box out of the reach of small children.

When replacing the waste toner box, be aware that it may soil your clothes or the immediate surroundings.

Содержание MX-2616N

































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание MX-2616N

Отзывы:

Sharp MX-2616N, Руководство по эксплуатации, Страница: 106 / 832

Результаты поиска

Содержание MX-2616N

Отзывы: