Sharp LC-42G77H, Руководство по эксплуатации

Страница: 49 / 78

47
Time Setup
This function allows you to select your local time zone.
Repeat steps 1 to 5 in Time Setup .
1
Press
a
/
b
to select “Time Setup”, and then
press ENTER .
6
Press ENTER , and then use
a
/
b
to select
your local time zone. Finally, press ENTER to
confi rm.
7
Audio Setup
Time Setup
I-Plate Setup
Video Setup
Time Zone
GMT + 08:00
I-Plate Setup (Information Plate Setup)
This function allows you to confi gure the display time
and time format for the information plate.
Press
c
/
d
to select “Option”.
2
Press MENU and the MENU screen displays.
1
Press
a
/
b
to select “Setup”, and then press
ENTER .
4
Press
a
/
b
to select “I-Plate Setup”, and then
press ENTER .
2
Press
a
/
b
to select your desired item.
3
Press
a
/
b
to select “System Setup”, and
then press ENTER .
5
Press
c
/
d
to select your desired value, and
then press ENTER .
4
Audio Setup
Time Setup
I-Plate Setup
Video Setup
Display Time 5 sec
24 HR Time Format
Press
a
/
b
to select “D-TV Menu”, and then
press
ENTER
.
3
Basic adjustment settings (Digital)
Multilingual
You can select a different audio language when the
broadcast has different audio language.
Using MPX on the remote control
Press MPX .
1
Press
a
/
b
to select your desired audio
language, and then press ENTER .
2
Language (Dolby D)
Language 1 (Mpeg)
Audio Language
Selected item
Language
(Dolby D)
Language 1
(Mpeg)
Description
You can enjoy Dolby Digital audio. Outputs
Dolby Digital audio from the digital output.
You can enjoy Mpeg audio. Outputs PCM
audio from the digital output regardless of
the “Digital Output” setting.
If “Language 1(Mpeg)” is selected, you can
press
a
/
b
to select your desired “Audio
type”.
3
Stereo
Dual
Mono Left
Mono Right
Audio Type
Using Multilingual on the menu screen
Repeat steps 1 to 6 in Digital Output .
1
Press
a
/
b
to select “Multilingual”, and then
press
ENTER
.
2
NOTE
• MPX does not work for split-screen in D-TV mode.
• Selectable audio language is depended on the broadcast
signal. If the broadcast signal contains only “Language
(Dolby D)”, then you cannot select “Language 1 (Mpeg)” in
“Audio Language”.
NOTE
• The audio type depends on the signal source.
42G77H_en_g.indd 47 42G77H_en_g.indd 47 2009/04/30 11:13:45 2009/04/30 11:13:45