ENGLISH
E-20
E-21
Water Tank / Back Panel / Humidifying Filter / Humidifying Tray
Humidifying Filter / Humidifying Tray
Dirt status
Kitchen detergent (powder) or Baking soda
Dissolve commercially available baking soda in water, and soak the Filter in the solution for
about 30 minutes.
Rinse the filter well after soaking.
When using baking soda (for persistent odors)
Filter Performances
IMPORTANT INFORMATION
Performances
Timing for
replacement
Timing for
maintenance
HEPA Filter
Active Carbon &
Silica Gel
Deodorizing Filter
Back Panel
Filter Frame (gray)
Filter Frame (white)
Humidifying Filter
Once a month
Do NOT rinse it
with water.
Once a 5 years
Replacement is
not required.
Once a 10 years
Once a 10 years
For Effective Use
WARNING
Pull out the plug
Be sure to power OFF
and unplug the unit
before maintenance.
[Otherwise, electric shock and/or injury could result]
Toothbrush, etc.
Sponge, etc.
Tank cap
Back Panel
Unscrew the Water Tank Cap and wash the inner
Water Tank and the Cap.
White mass could adhere to the rubber part of the Water Tank
Cap. Remove the dirt by using a toothbrush or similar tool.
Soak the panel into water with diluted
kitchen detergent.
Rinse off detergent thoroughly.
Dry the panel in the shade.
Water Tank
Soak for about 10 min.
Back Panel
Red, yellow, or white dirt may be attached
to Humidifying Filter / Tray. It is mineral or
iron substance in tap water. It is not defect.
Parts to be cleaned
Required chemical
Amount of use
How to wash
Duration
After soaking
Humidifying Filter / Humidifying Tray
Humidifying Filter
Hard white mass
Hard water scale or odor
(See the lower part of this page for
"When using baking soda")
Citric acid
Available at pharmacies or drug stores
Approx. 60g per 1L of water
Water or lukewarm water (approx. 40°C or less)
Approx. 6g per 1L of water
Soak
Soak
About 30
~
60 min.
About 2 hours
Rinse off detergent or citric acid thoroughly with water. (To avoid odor or deformation/discoloration of the main unit)
Caution
•
The use of non-designated detergent could result in deformation, discoloration or cracks (water leakage).
• Insufficient rinsing could result in the remaining odor of detergent or citric acid or the
deformation/discoloration of the main unit.
• If you use the product while water scale or white mass remains, water leakage may occur.
It absorbs water from
Humidifying Tray,
humidifying the air passing
through it.
It catches pollen, allergens
(dust mite and their feces),
mold, dust, cigarette smoke
(particles), and hair of pet.
It absorbs life odor such as
formaldehyde, cigarette
smoke (odor), odor of toilet,
odor of food waste and odor
of pet.
It catches large dust
particles.
Once a month
Caution
• It is not possible to remove all of harmful gas components and odor components that are
constantly generated.
• The air purifier is designed to collect dust or odor components in a room. If it operates in the environment
with strong odors like air freshener, aroma oil, cigarettes and BBQ, the odors will adhere to filters which
might generate bad odor in weeks to months.
In this case, clean the “HEPA Filter”, “Active Carbon & Silica Gel Deodorizing Filter and “Humidifying
Filter”.
If odors still persist after cleaning, it is recommended to replace the filters.
• In the environment with strong odors, it is recommended to ventilate the room regularly.
• The unit takes longer to remove odor than dust.
•
Do not use fluorocarbon polymer or silicone-containing products* near the main unit.
The fluorocarbon polymer or silicone could get stuck inside the unit, preventing it from discharging
Plasmacluster Ion.
* Hair care products (e.g. split-end coat, hair mousse, hair treatment, etc.), cosmetics, antiperspirant,
antistatic agents, waterproof sprays, polishes agent, glass cleaners, chemical clothes, wax, etc.
The filter frame is
not a replacement
part. Do not throw
away.
When it is heavily
contaminated or
smelly
Do NOT rinse it
with water.
When it is heavily
contaminated or
smelly
E-22
page
E-22
page
E-23
page
Approx. 60g per liter of water
Amount of use
CARE AND MAINTENANCE
(Continued)
KC-JG20A(単ページ).indd 22
2016/10/12 10:17:46
Содержание KC-JG20A
