Sharp KC-JG20A, Руководство по эксплуатации

Страница: 19 / 64

ENGLISH
• See the knack of detachment
(At the lower left of this page)
2
3
1
Gray side
E-16 E-17
When “Filter Maintenance Indicator Light” turns on
Back
Back Panel
Humidifying Filter
Indicates the time to clean the Water Tank, Humidifying Filter, Humidifying Tray, Back Panel and Sensor unit.
Sensor Unit
Water Tank
Humidifying Tray
Knack of detachment
Once a month
Wash
with water
Humidifying Filter / Humidifying Tray
Tank cap
Handle of
water tank
Float
Tray Partition
Roller
Back Panel / Sensor Unit
Back
Sensor Unit
(internal)
CARE AND MAINTENANCE
WARNING
Pull out the plug
Be sure to power OFF
and unplug the unit
before maintenance.
[Otherwise, electric shock and/or injury could result]
When the unit operates for 24 hours a day, the Indicator Light turns ON (Orange) in approximately a month (720 hours).
Be sure to clean
the unit to keep it
clean for use.
See page for cleaning when the parts are too dirty and smelly
.
E-20
Humidifying Tray
Unplug
Detach the
Water Tank
and clean it.
Slightly lift up the
Humidifying Tray and then
pull it out. Clean the
Humidifying Filter and the
Humidifying Tray .
Reinstall the Humidifying
Filter, Humidifying Tray , and
Water Tank back to the unit.
• Be careful, do not spill out water
from the Humidifying Tray.
• Be sure to mount the
Humidifying Filter with the
correct side facing front.
(The gray side should face
the front)
• After cleaning, make sure to press the OFF timer button for at
least 3 seconds to reset it even if the Filter Maintenance Indicator
Light has not been on.
You will be notified of the next maintenance time about a month later (if the
unit is operated 24 hours a day)
Clean the Back Panel.
Detach the Back panel and
then clean the Sensor Unit.
Reinstall the Back Panel,
insert the plug into the socket,
and press the OFF timer
button for 3 seconds or more.
(The Filter Maintenance
Indicator Light turns off)
Press for
at least
3 seconds
Beep
Water Tank
<<Every time the
Water Tank is filled>>
Fill a small amount of water
into the Water Tank and
shake it for rinsing
the inside of the Tank
Caution
• Do not place the
tank with the tank
cap down.
(otherwise, water
leakage may occur)
• Do not shake the Water
Tank by holding the
handle.
Caution
• The Tray Partition is
attached loosely.
It is not a defect.
• Do not detach the Tray
Partition, Float and
Roller.
Caution
• Avoid applying
excessive force.
(Otherwise, the filters
may be damaged.)
• Remove the dust inside by a
vacuum cleaner through the
hole in the sensor unit.
(To prevent malfunctioning of
the sensor)
Rinse the
filter
with water
• Do not disassemble the filter frame
when cleaning Humidifying Filter.
Remove
dust by a
vacuum cleaner.
Caution
• Drain water from the
Humidifying Tray periodically.
(Mold or saprophytic bacteria
could propagate resulting in
smelly odor)
Hold it up slightly
Pull out
KC-JG20A(単ページ).indd 19 2016/10/12 10:17:44