Sharp KC-JG20A, Руководство по эксплуатации

Страница: 16 / 64

ENGLISH
E-14
E-15
The operation will be automatically stopped as scheduled.
1 Hour 2 Hours 4 Hours 8 Hours OFF
Frequently Asked Questions CONVENIENT FUNCTIONS
(Continued)
Check
(Within 3
seconds)
Select the
preferred time
Press for at least
3 seconds
Press for at least
3 seconds
Setting/Canceling
Setting/Canceling
(In operation)
(While the timer is in operation)
OFF Timer
Beep
Beep
Beep Beep Beep Beep
Beep,
Beep
• The setting is automatically completed when no
operation is performed for 3 seconds.
(The OFF Timer Indicator Light will turn on)
• To turn off, change the setting to display “ (OFF)”.
(The OFF Timer Indicator Light will turn off.)
• It returns to the previous display in 3 seconds after the
setting is changed.
• The remaining time is displayed when pressing the
button once. (The time is rounded up to the nearest hour)
• If you press the OFF timer button while the remaining
time is displayed, you can change the setting time or turn
off the OFF timer.
(Example)
Remaining time: Over 3 hours and less than 4 hours
Sound Indicator Setting for Water Supply
(When the unit is OFF) (When the unit is OFF)
“Set” “Cancel”
Beep,
Beep
Beep
• When this setting is “ON”, the unit
generates an audible beep sound (for
about 10 seconds) while the Humidifying
Indicator Light is blinking.
• When the setting is “OFF”, the unit
generates no beep sound while the
Humidifying Indicator Light is blinking.
• If the unit is unplugged, this setting will be
cancelled and no beep sound will be
generated.
When the Humidifying Filter is moisturized, humid air will be discharged from air
outlet. Humidification is achieved without water-boiling, so steam or vapour cannot
be seen. It will not humidify the room excessively.
I do not see steam. Is it really humidifying? Doesn't
the product humidify the room too much?
Humidity may not rise to the optimal level when there is no water in the tank or the
humidifying filter is clogged with hard water scale or dust. Clean the humidifying
filter, the tray and the water tank.
Also, humidity may not rise to the optimal level depending on the size or condition
of a room where the product is used.
In that case, set the fan speed to “MAX” or “MED”.
Why does the humidity level not increase during
humidifying operation?
The tap water is chlorinated and germs hardly develop.
If you use any water other than tap water (well water, water of water cleaner,
bottled mineral water etc.), mold or germs develop frequently, producing plenty of
scale and odors.
Carry out the maintenance frequently is required.
Do I have to use tap water?
Odor could come out from the air outlet through filters or other sections after the
unit in use is exposed to strong odor such as cigarette or BBQ smoke or if
saprophytic bacteria have propagated in residual water in the Humidifying Tray or
Water Tank.
Clean the HEPA Filter, Active Carbon & Silica Gel Deodorizing Filter, Humidifying
Filter, Humidifying Tray and Water Tank.
The air blowing out is smelly.
As the water draws heat from room when it is evaporated, the temperature of wind
becomes lower than room temperature. You may feel cold depending on the size
of the room.
(When the room temperature is 20°C and the humidity is 30%, the temperature of wind blowing out
from the air outlet is approximately 15°C)
The unit is designed to blow air toward a diagonally rear direction and a front direction
at the same time to efficiently deliver the high-density Plasmacluster Ion throughout a
room. You may feel cold depending on the location where the unit is placed.
(If you feel cold, change the location of the unit)
It seems that the unit is blowing out cold air.
E-16
～
20
page
E-16,17,20
page
• Press the Button to change settings as follows:
KC-JG20A(単ページ).indd 16 2016/10/12 10:17:41