E-9
6
5
4
Attaching to the seatback(cont)
7
Insert the belt through the
belt guide and then pull and
wrap the belt around the
shaft.
※
The back of the unit has
belt guides in two places.
(Wrap the belt around the shaft
horizontally.)
Pull the belt through the
buckle guide, as shown on
the left.
①
②
①
While supporting the unit
with a hand, pull the belt
in the direction indicated
by the arrow.
②
When firmly locked in
place, make sure that the
buckle closes.
To keep the unit from falling, tie the tip of
the belt into a knot.
Place the tip of the belt between the unit
and headrest.
After storing the belt, adjust the height of
the headrest.
cont
FP-JC2.indd 9
2018/06/28 11:35:34
