background image

E-4

• 

If the accessory socket is integrated into the ashtray, be sure that cigarettes

 

are completely extinguished before using the unit.

• When leaving the vehicle, unplug the car adapter and close the ashtray’s lid.

(Failure to do so could lead to fire caused by the smoldering cigarettes.)

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of electric shock, fire or injury :

Caution

To reduce the risk of electric shock, fire or 

injury :

•  Do not attach or wire in a place that may interfere with the operation of the 

car's air bags,(as doing so can cause a traffic accident or injury.)Air bag 

activation can cause the unit and other objects to fly about the cabin.

•  Do not touch the metal parts of the car adapter’s car adapter (or of the 

accessory socket).(The metal parts of the car adapter could be hot directly 

after the car is stopped, and could cause burns if touched.)

•  Make sure that accessory attachment belt is not loose and secured tightly 

in place.(A loose belt can become detached or fall off during operation and 

cause injury or accident. )

• 

Do not operate the air purifier without the filter attached.

 

(Without the filter, the air purifier will not filter air and may also malfunction.)

•  Move the unit out of the car when using room fumigating type insecticides 

or deodorizers. If not, the chemicals could get inside the unit 

and later be 

ejected from the air outlet, possibly harming your health.

• 

If the unit risks falling out (when driving on rough roads,over bumps, etc.), 

either slow down or remove the unit

 

beforehand. (Failure to do so could 

cause injury or damage to the unit.)

•  When attaching the unit, only use the accessory attachment belt,(as failing 

to do so can cause accident or injury.)Before operating the unit, make 

sure that the unit is properly secure and that the attachment belt is not 

loose,(otherwise the unit may come loose or fall off and cause a traffic 

accident or injury.)

•  Do not use items of silicone-based products* near the unit. 

The fluororesin or silicone could get stuck inside the unit, preventing it from 

producing Plasmacluster ions. 

If this happens, remove the dust from the electrode section of the 

Plasmacluster Ion Generating Unit. 

 

* Hair care products (split end coatings, hair mousses, hair treatments, etc.), 

cosmetics, antiperspirants, antistatic agents, waterproofing sprays, polishes,

 

glass cleaners, chemicalimpregnated clothes, wax, etc.

The inside of the unit has insulation with fluoresin, silicon, and similar 

materials that can cause the air purifier to not emit Plasmacluster ions. 

FP-JC2.indd   4

2018/06/28   11:35:16

Содержание FP-JC2

























Отзывы: