Sharp FP-JC2, Руководство по эксплуатации

Страница: 17 / 24

E-15
1
2
3
Adjusting Sensor Sensitivity(Dust / Odor Sensor)
Press more
3 seconds
(Less than 8
seconds) Set the
desired sensor
sensitivity.
• The airflow lamp displays
the current sensor setting.(At
time of shipment, the lamp
displays the standard setting.)
• Pressing the button, changes
the display as shown below.
｢
LOW
｣
｢ STANDARD ｣ ｢ HIGH ｣
• If the power OFF Button is not pushed within 8 seconds
of adjusting sensor sensitivity,the setting will be saved
automatically.
• The sensor sensitivity setting will be saved even if the
unit is unplugged.
Items detected by the sensor
• House dust (dirt, mite feces and remains, mold spores, pollen), cigarette
smoke, etc.
• Cigarette and incense stick odor, cosmetic, alcohol, spray, and other odors.
Cleanliness Monitor
｢
Yellow
｣
…SET to “LOW”
｢ Green ｣ …SET to “HIGH”
Setting the filter maintenance notification lamp time
You can change the amount of time that accumulates until the filter
maintenance notification lamp lights up to the amount that you prefer.
※
At time of shipment, the time is set to the standard time of 40 hours.
• With the unit idol, pressing the Turbo operation
button and Light control button at the same time for 3
seconds switches the unit to the Filter maintenance
lamp setting mode.
• Press the Turbo button to specify the time.
Weak
lamp lit
(20 hours)
Turbo
lamp lit
(80 hours)
Standard
lamp lit
(40 hours)
Benchmarks for setting the filter maintenance lamp light up time.
Example:
When set to 40 hours and driving 2 hours a day 5 days a week, the lamp
will light up in about one month.
(With the unit OFF)
FP-JC2.indd 15 2018/06/28 11:35:51