manualshive.com logo in svg

Sharp FO DC535 - B/W Laser - Fax, Сетевое руководство, Страница: 95 / 248

Поделиться
Скачать
Sharp FO DC535 - B/W Laser - Fax Скачать руководство пользователя страница 95

Sending an Image Using a Rapid Key 

93

3. Netw

or

k 

Scanner

8

Press 

. The document is scanned and transmitted.

START/
ENTER

Sending an Image Using a Rapid Key or 
Speed Dial Number

Sending an image using a Rapid Key

Use this procedure to scan a document and send the image to an E-mail, FTP, 
or Desktop destination that has been stored in a Rapid Key.

Important: 

To use this procedure, the setup procedures outlined on page 77 

must be completed. In the case of Scan to E-mail, this includes setting a 
default sender as explained in the procedure beginning on page 88 of this 
manual.

♦

If you are sending the image to an e-mail destination and need to change 
the subject, use the procedure on page 88.

1

Load the document(s).

•

SEND READY will appear in the 
display.

•

Press  

and/or  

to 

set 

the resolution and contrast if needed. 
The default resolution is FINE. Note 
that STANDARD and SUPER FINE are 
primarily for faxing and are not 
recommended for scanning.

2

Press the appropriate Rapid Key.

•

The name of the recipient will appear in the display. (If the destination is not 

correct, press 

.)

•

If the destination is an FTP or Desktop destination, or if the destination is 
an e-mail destination and you don’t need to enter a message or change any 
of the e-mail options, this completes the procedure.

RESOLUTION

CONTRAST

STOP

Содержание FO DC535 - B/W Laser - Fax

























































































































































































































































Отзывы:

Нет отзывов