Sharp FO DC535 - B/W Laser - Fax Скачать руководство пользователя страница 222

Страница: 222 / 248

220

10. Troubleshooting

Problems and Solutions

Line error

Problem

Solution

LINE ERROR appears in
the display, and/or a
transaction report is
printed out with

COM. E-

and a number from

in the

NOTE

column.

Try the transaction again. If the error persists, check
the following:

• Check the hookup. The cord from the

TEL. LINE

jack to the wall jack should be no longer than six
feet.

• Make sure there are no modem devices sharing the

same telephone line.

• Check with the other party to make sure their fax

machine is functioning properly.

• Have your telephone line checked for line noise.

• Try connecting the machine to a different telephone

line.

• If the problem still occurs, your machine may need

service.

Содержание FO DC535 - B/W Laser - Fax

























































































































































































































































Результаты поиска

Содержание FO DC535 - B/W Laser - Fax

Отзывы:

Sharp FO DC535 - B/W Laser - Fax, Сетевое руководство, Страница: 222 / 248

Результаты поиска

Содержание FO DC535 - B/W Laser - Fax

Отзывы: