Sharp FO DC535 - B/W Laser - Fax Скачать руководство пользователя страница 232

Страница: 232 / 248

Clearing Paper Jams

230

Clearing Paper Jams

Clearing a jammed document

If the original document doesn’t feed properly during transmission or copying,

or REMOVE ORIGINAL(S) appears in the display, first try pressing

. If

the document doesn’t feed out, open the operation panel and remove it.

Important:

Do not try to remove a document without opening the operation panel. This
may damage the feeder mechanism.

START/
ENTER

Open the operation panel.

•

Squeeze the release marked

PANEL

RELEASE

and pull up.

Remove the document.

Close the operation panel, making sure
it clicks into place.

Содержание FO DC535 - B/W Laser - Fax

























































































































































































































































Результаты поиска

Содержание FO DC535 - B/W Laser - Fax

Отзывы:

Sharp FO DC535 - B/W Laser - Fax, Сетевое руководство, Страница: 232 / 248

Результаты поиска

Содержание FO DC535 - B/W Laser - Fax

Отзывы: