Sharp FO-2950M - B/W Laser - All-in-One, Руководство по обслуживанию

Страница: 7 / 232

1 – 5
UX-4000MU
FO-2950MU/C
3
Remove the new toner cartridge from its packaging. Shake the
cartridge side to side four or five times to distribute the toner
evenly within the cartridge.
Carefully remove the band and the cardboard packaging material
from the toner cartridge.
4
Hold the toner cartridge by the handle with the stamped markings
on the cartridge facing upwards, and insert the cartridge into the
print compartment.
5
Place your thumb on the center of the handle where it is marked
PUSH, and push the handle down and in so that the cartridge fits
into place.
6
Close the print compartment cover, pressing down firmly on each
side to mack sure it is completely closed.
7
Reset the toner counter by pressing the following keys:
8
Reset the drum counter by pressing the following keys:
• Note: This setting is only necessary after you have replaced the
drum cartidge (not after replacing the toner cartridge).
9
FUNCTION
CLR TONER COUNT
PRESS START KEY
START
START
Display shows:
9
FUNCTION
CLR DRUM COUNT
PRESS START KEY
Display shows:
3. Replacing the drum cartridge
To maintain excellent printing quality, we recommend that you
replace the drum cartridge after 20,000 pages have been printed.
You can view the number of pages printed in the display by pressing
the following sequence of keys:
When finished, press the STOP key to return to the date and time
display.
Replace the drum cartridge with the following cartridge:
Sharp UX-400DR drum cartridge
1
Grasp the print compartment cover at both sides as shown, and
pull up to open the cover.
• Caution! The fusing unit inside the print compartmt becomes
v e r y h o t d u r i n g o p e r a t i o n . D o n o t t o u c h t h e i n s i d e o f t h e
compartment or the paper guide on the underside of the print
compartment cover.
START
9
FUNCTION