Sharp FO-2950M - B/W Laser - All-in-One, Руководство по обслуживанию

Страница: 11 / 232

1 – 9
UX-4000MU
FO-2950MU/C
7
The fax has been set at the factory to scale the size of received
faxes to letter size paper. If you have loaded legal paper, you
must change the paper size setting to legal. Press these keys:
The display will show:
The display will briefly show your selection and then show:
Press the STOP key to return to the date and time display.
PAPER SIZE SET
1=LETTER, 2=LEGAL
FINE PRIORITY
1=YES, 2=NO
PAPER SIZE SET
3=A4
Press 1 to select LETTER or 2 to select LEGAL. (You can also
press 3 to select A4.)
or
LEGAL
STOP
LETTER
4
FUNCTION
1 2
6. Clearing a jammed document
1
Open the operation panel by grasping the panel release and pull-
ing up.
2
Remove the document.
If the original document doesn't feed properly during transmission or
copying, or DOCUMENT JAMMED appears in the display, first try
pressing the START key. If the document doesn't feed out, open the
operation panel and remove it.
Important:
Do not try to remove a document without opening the operation
panel. This may damage the feeder mechanishm .
3
Close the operation panel, making sure it clicks into place.
7. Clearing jammed printing paper
1
If most of the jammed page is protruding from the back of the fax,
pull the paper release lever toward you and try pulling the page
out.
2
If the jammed page comes out, take out the rest of the paper in
the tray, straighten the stack, put it back in the paper tray, and
push down the paper release lever.
• If you are unable to clear the jam in this way, continue with the
following steps.
3
Grasp the print compartment cover at both sides as shown, and
pull up to open the cover.
• Caution!
The fusing unit inside the print compartment becomes very hot
during operation. Be careful not to touch the inside of the
compartment.