manualshive.com logo in svg

Sharp FO-2950M - B/W Laser - All-in-One, Руководство по обслуживанию

Поделиться
Скачать
Sharp FO-2950M - B/W Laser - All-in-One Скачать руководство пользователя страница 148

EDITING AND HANDLING OF IMAGE FILES

3-10

2

In the Tools menu, select Image Enhancement. A menu with the tools will
appear. You can use these tools to manipulate the document that is open. Any
changes you make can be undone with the Undo command in the Edit menu.

Below is a description of each tool and some suggested uses:

• Rotate Left/Rotate Right

These commands allow you to rotate an image 90 degrees left or right.

• Flip Horizontally

This flips an image horizontally, as if it were on a sheet of transparent film and you
flipped it over to view it from the other side.

• Flip Vertically

The effect on the image is the same as the Flip Horizontally command, except that the
image is flipped vertically.

• Straighten

The straightening tool is especially useful on images that have become slightly
skewed, or look a bit off after scanning.

• Invert

This feature changes dark areas to light, and vice versa. In effect, it creates a
“photographic negative” of the image.

• Sharpen...

This feature accentuates the differences between light and dark pixels to create
greater contrast in the image. Move the slider as desired to sharpen or blur an
image.

• Gray Scale

Remove all colors and convert the document to black and white with shades of gray.

• Contrast

Increase or decrease the contrast to brighten or darken an image.

• Crop

This feature is used to crop (cut off) the edges of an image. After selecting this tool,
drag the cursor to select the rectangular area of the image that you want to remain.
When you release the mouse button, the parts outside of the rectangle are erased.

fo-3.p65

1/28/00, 11:38 AM

10

manuals4you.com

manuals4you.com

Содержание FO-2950M - B/W Laser - All-in-One









































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды